03-06-2017 Council Packet - Laserfiche WebLink

Home Browse Search

2015 MINNESOTA STATE FIRE CODE 489 APPENDIX H HAZARDOUS MATERIALS MANAGEMENT PLAN (HMMP) AND HAZARDOUS MATERIALS INVENTORY STATEMENT (HMIS) INSTRUCTIONS The provisions contained in this appendix are not mandatory unless specifically referenced in the adopting ordinance. SECTION H101 HMMP H101.1 Part A (See Example Format in Figure 1). 1. Fill out items and sign the declaration. 2. Part A of this section is required to be updated and sub- mitted annually, or within 30 days of a process or man- agement change. H101.2 Part B–General Facility Description/Site Plan (See Example Format in Figure 2). 1. Provide a site plan on 81/2 by 11 inch (215 mm by 279 mm) paper, showing the locations of all buildings, structures, outdoor chemical control or storage and use areas, parking lots, internal roads, storm and sanitary sewers, wells and adjacent property uses. Indicate the approximate scale, northern direction and date the drawing was completed. H101.3 Part C–Facility Storage Map–Confidential Infor- mation (See Example Format in Figure 3). 1. Provide a floor plan of each building identified on the site plan as containing hazardous materials on 81/2-inch by 11-inch (215 mm by 279 mm) paper, identifying the northern direction, and showing the location of each storage and use area. 2. Identify storage and use areas, including hazard waste storage areas. 3. Show the following: 3.1. Accesses to each storage and use area. 3.2. Location of emergency equipment. 3.3. Location where liaison will meet emergency responders. 3.4. Facility evacuation meeting point locations. 3.5. The general purpose of other areas within the building. 3.6. Location of all aboveground and underground tanks to include sumps, vaults, below-grade treatment systems, piping, etc. 3.7. Show hazard classes in each area. 3.8. Show locations of all Group H occupancies, control areas, and exterior storage and use areas. 3.9. Show emergency exits. SECTION H102 HMIS H102.1 Inventory statement contents. 1. HMIS Summary Report (see Example Format in Figure 4). 1.1. Complete a summary report for each control area and Group H occupancy. 1.2. The storage summary report includes the HMIS Inventory Report amounts in storage, use- closed and use-open conditions. 1.3. Provide separate summary reports for storage, use-closed and use-open conditions. 1.4. IBC/IFC Hazard Class. 1.5. Inventory Amount. [Solid (lb), Liquid (gal), Gas (cu ft, gal or lbs)]. 1.6. IBC/IFC Maximum Allowable Quantity per control area (MAQ). (If applicable, double MAQ for sprinkler protection and/or storage in cabinets. For wholesale and retail sales occu- pancies, go to Tables 5003.11.1 and 5704.3.4.1 of the International Fire Code for MAQs.). 2. HMIS Inventory Report (see Example Format in Figure 5). 2.1. Complete an inventory report by listing prod- ucts by location. 2.2. Product Name. 2.3. Components. (For mixtures specify percent- ages of major components if available.) 2.4. Chemical Abstract Service (CAS) Number. (For mixtures list CAS Numbers of major components if available.) 2.5. Location. (Identify the control area or, if it is a Group H occupancy, provide the classifica- tion, such as H-2, H-3, etc.) 2.6. Container with a capacity of greater than 55 gallons (208 L). (If product container, vessel or tank could exceed 55 gallons, indicate yes in column.) 2.7. Hazard Classification. (List applicable classi- fications for each product.) 2.8. Stored. (Amount of product in storage condi- tions.) Copyright © 2016 ICC. ALL RIGHTS RESERVED. Accessed by James Lee on Dec 14, 2016 8:21:27 AM pursuant to License Agreement with ICC. No further reproduction or distribution authorized. ANY UNAUTHORIZED REPRODUCTION OR DISTRIBUTION IS A VIOLATION OF THE FEDERAL COPYRIGHT ACT AND THE LICENSE AGREEMENT, AND SUBJECT TO CIVIL AND CRIMINAL PENALTIES THEREUNDER.