Laserfiche WebLink
8 May 2020 Draft Planned-Unit District <br /> 915-1 <br /> <br /> <br /> <br />SECTION 915 PLANNED UNIT DEVELOPMENT OVERLAY DISTRICT <br /> <br />915.010 Purpose .................................................................................................................... -1 <br />915.020 Relationship to other Applicable Regulations .......................................................... 1 <br />915.030 Platting Requirement ................................................................................................. 1 <br />915.040 Minimum Project Size ............................................................................................... 1 <br />915.050 Phasing of Development ........................................................................................... 2 <br />915.060 Administration .......................................................................................................... 2 <br />915.070 Principal and Accessory Uses in the PUD Overlay District ..................................... 2 <br />915.080 Development Standards in the PUD Overlay District .............................................. 3 <br /> <br />915.010 Purpose <br />The Planned Unit Development Overlay District (PUD) is established as a means to facilitate the <br />development of land in an integrated and innovative fashion, to allow for flexibility in site design, <br />and to result in a better quality of development than would otherwise be possible, while being <br />sensitive to environmental, cultural, and economic considerations. <br /> <br />The Planned Unit Development Overlay District shall not be used merely to circumvent the <br />normal requirements of the zoning ordinance. Development under these provisions must provide <br />net demonstrable benefits not otherwise available to the community. <br /> <br />Adding the Planned Unit Development Overlay District to the zoning of a parcel shall supplement <br />and modify the provisions of the base zoning district with specific requirements and standards <br />that are unique to the planned development. <br /> <br />915.020 Relationship to other Applicable Regulations <br />A Planned Unit Development shall be subject to all applicable standards, procedures and <br />regulations of this ordinance and the zoning district in which it is located, including applicable <br />site development standards contained in Section 903, General Provisions, except as otherwise <br />provided in this chapter or in the approved PUD. <br /> <br />915.030 Platting Requirement <br />All land proposed for the Planned Unit Development Overlay District shall be platted or replatted <br />into one or more lots in compliance with the applicable requirements of Section 1000, <br />Subdivision Ordinance. For the purposes of this chapter, the development plan shall include the <br />necessary information to serve as a preliminary plat for the development. <br /> <br />915.040 Minimum Project Size <br />There shall be no minimum size limitation for a Planned Unit Development. <br />