Laserfiche WebLink
<br />11 <br /> <br /> <br />Figure 5: Proposed location of new electrical equipment on building exterior <br />From the disconnect, the wiring in conduit will penetrate through the wall and into the IT room. From the IT <br />room, the conduit will be drilled through the floor and into the electrical area of the basement. Once at the <br />basement, a 100A fused disconnect will be mounted within 25’ of the CT cabinet, possibly next to the existfng <br />transfer switch or perhaps on the opposite wall from the cabinet depending on exact space available. Finally, <br />the point of interconnectfon will be made at the CT cabinet. <br />It’s possible reaching the basement will be difficult. If for some reason the route through the IT room is not <br />possible, then a hole could be dug below grade and the conduit penetrated through the wall and into the <br />basement. This is not preferable, and Apadana will work with the city to find other possible routes to the <br />basement through the inside of the building. <br />