Laserfiche WebLink
Power Optimizer for North America <br />P1101 <br />Power Optimizer Model <br />(Typical Module Compatibility) <br />P1101 (for up to 2 x high power or bi- facial modules) <br />INPUT <br />Rated Input DC Power(1) 1100 W <br />Connection Method Single input for series connected modules <br />Absolute Maximum Input Voltage (Voc at lowest temperature) 125 Vdc <br />MPPT Operating Range 12.5 - 105 Vdc <br />Maximum Short Circuit Current (Isc) 14.1 Adc <br />Maximum Short Circuit Current per Input (Isc) - Adc <br />Maximum Efficiency 99.5 % <br />Weighted Efficiency 98.6 % <br />Overvoltage Category II <br />OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) <br />Maximum Output Current 18 Adc <br />Maximum Output Voltage 80 Vdc <br />OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) <br />Safety Output Voltage per Power Optimizer 1 ± 0.1 Vdc <br />STANDARD COMPLIANCE <br />Photovoltaic Rapid Shutdown System Compliant with NEC 2014, 2017, 2020 <br />EMC FCC Part 15 Class A, IEC61000-6-2, IEC61000-6-3 <br />Safety IEC62109-1 (class II safety), UL1741, UL3741 <br />Material UL94 V-0, UV resistant <br />RoHS Yes <br />INSTALLATION SPECIFICATIONS <br />Compatible SolarEdge Inverters All commercial three phase inverters <br />Maximum Allowed System Voltage 1000 Vdc <br />Dimensions (W x L x H) 129 x 162 x 59 / 5.1 x 6.4 x 2.32 mm / in <br />Weight 1064 / 2.34 gr / lb <br />Input Connector MC4(2) <br />Input Wire Length Options <br />1 <br />1.6 / 5.2 m / ft 2 <br />3 <br />Output Wire Type / Connector Double insulated; MC4 <br />Output Wire Length 2.4 / 7.8 m / ft <br />Operating Temperature Range(3) -40 to +85 / -40 to +185 ˚C / ˚F <br />Protection Rating IP68 / NEMA6P <br />Relative Humidity 0 - 100 % <br /> <br />(1) Rated power of the module at STC will not exceed the Power Optimizer “Rated Input DC Power”. Modules with up to +5% power tolerance are allowed. <br />(2) For other connector types please refer to: https://www.solaredge.com/sites/default/files/optimizer-input-connector-compatibility.pdf. <br />(3) For ambient temperature above +70˚C / +158˚F, power de-rating is applied. Refer to the Power Optimizers Temperature De-Rating Application Note for more details. <br /> <br />PV System Design Using a SolarEdge <br />Inverter <br />208V Grid <br />SE17.3K* <br />277/480V Grid <br />SE30K <br />277/480V Grid <br />SE40K* <br /> <br />Compatible Power Optimizers P1101 P1101 P1101 <br />Minimum String <br />Length <br />Power Optimizers 10 14 14 <br />PV Modules 19 27 27 <br />Maximum String <br />Length <br />Power Optimizers 30 30 30 <br />PV Modules 60 60 60 <br />Maximum Continuous Power per String 8820 15300 15300 W <br />Maximum Allowed Connected Power per String(4) <br />(Permitted only when the difference in connected <br />power between strings is up to 2,000W for the <br />277/480V grid, or 1,000W for the 208V grid) <br />1 string - 10020 1 string - 17550 2 strings or less - 17550 <br />W 2 strings or more - 10620 2 strings or more - 20300 3 strings or more - 20300 <br />Parallel Strings of Different Lengths or Orientations Yes <br />* The same rules apply for Synergy units of equivalent power ratings, that are part of the modular Synergy Technology inverter. <br />(4) To connect more STC power per string, design your project using SolarEdge Designer. <br /> <br /> <br /> <br />© SolarEdge Technologies Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Ltd. <br />All other trademarks mentioned herein are trademarks of their respective owners. Date: July 14, 2022 DS-000165-NAM. Subject to change without notice.