Laserfiche WebLink
City of Little Canada, Minnesota <br />Ordinance <br />AN ORDINANCE AMENDING CHAPTERS 1001 and 1004 OF THE LITTLE CANADA <br />CITY CODE, KNOWN AS THE SUBDIVISION ORDINANCE, BY PROVIDING FOR <br />STANDARDS RELATING TO THE APPROVAL, MODIFICATION, AND DENIAL OF <br />PROPOSED PRELIMINARY AND FINAL PLATS. <br />The City Council of the City of Little Canada hereby ordains: <br />Section 1. <br />Section 1004.020(e)(3) is hereby amended to add the following: <br />1004.020(e)(3) i. The City Council may deny or require <br />modifications to a proposed preliminary plat when said plat fails <br />to comply with any of the requirements of this ordinance, or <br />other applicable regulations, including the Zoning Ordinance. In <br />addition, the City Council may deny or require modifications to a <br />proposed preliminary plat when the City Council finds that <br />des.ite technical com.liance with applicable ordinances the .lat <br />design results in a likelihood of extraordinary public costs for <br />future maintenance or the potential for public safety hazards <br />that are not typical for subdivisions in Little Canada. <br />Section 2. <br />Section 1001.080 is hereby amended to read as follows: <br />1001.80. CONFLICT. <br />(a) Whenever there is a difference between minimum <br />standards or dimensions specified herein and those <br />contained in other official regulations, resolutions or <br />ordinances of the City, the most restrictive standards <br />shall apply. <br />(b) Whenever a design feature, improvement, standard, or <br />technique is proposed in a plat that is not provided <br />for in these regulations, said design feature, <br />standard or technique shall be considered to be a <br />non- standard improvement". Non - standard <br />improvements are grounds for denial of a plat. The <br />City Council may at its sole discretion, permit non- <br />standard improvements where such improvements are <br />considered to be in the best interests of the City. <br />Section 3. <br />Section 1004.030.(a) is hereby amended to read as follows: <br />(a) Filing. After the preliminary plat has been approved, <br />final plat shall be submitted for review as set forth in the <br />