Laserfiche WebLink
allowed. <br />C. All plats and building plans shall be reviewed and <br />approved by the Council before issuance of a building <br />permit. <br />. D. 1. All buildings in the "I -P" District -shall be <br />constructed of solid wall masonry, pre -cast <br />concrete, aggregate panels, or wood frame masonry <br />veneer (excluding stucco). Wood and metal exterior <br />may be allowed as part of window and door frame or <br />fascia treatment of the exterior wall facing <br />design. <br />2. The following materials, -in conjunction with the <br />materials in 918.060, D, 1, may be used to a <br />maximum of twenty -five (25) percent of the proposed <br />area if it is coordinated into the architectural <br />- design of the structure. <br />a. Wood, provided the surfaces are finished for <br />- exterior-use and wood of proven, exterior <br />durability is used, such as cedar, redwood, <br />cypress. <br />Curtain wall panels of steel, fiberglass and <br />aluminum, (non - structural, non -load bearing) <br />—= and finished with -a durable non -fade surface <br />and their fasteners are of a corrosion <br />resistant design. <br />Glass curtain wall panels. <br />d. Stucco. <br />.3. _:_The proposed building maintains the quality and <br />;_.,;value intended by the Ordinance. <br />4. •..The proposed building is compatible and in harmony <br />with other structures within the district. <br />5. The provisions of Section 921.010, C of this <br />Ordinance are considered and the request is found <br />to comply with these criteria. <br />(Amended: Ord. 256, 261, 262, 285, 296, 309) <br />Page 22 <br />