My WebLink
|
Help
|
About
|
Sign Out
Home
Search
2016-067 Council Resolution
LinoLakes
>
City Council
>
City Council Resolutions
>
2016
>
2016-067 Council Resolution
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
7/28/2016 10:17:09 AM
Creation date
7/28/2016 9:10:50 AM
Metadata
Fields
Template:
City Council
Council Document Type
Resolutions
Meeting Date
07/11/2016
Council Meeting Type
Regular
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
55
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
A. Section 4.2 of the Lino Lakes Town Center Design & Development Guide shall <br />be amended as follows: <br />Variation in Housing Mix <br />Within each Residential District, a minimum of two housing models and <br />architectural treatments is required as follows: <br />Facade Treatment. At least two (2) unique architectural treatments for each <br />housing model are required. The architectural treatments must differ in each of <br />three categories: a) facade color, roof color, or siding material; b) window pattern <br />and trim detail; and c) porch, entryway, or balcony detailing. Identical buildings <br />shall not be adjacent to or across the street from each other. <br />B. Section 4.3 of the Lino Lakes Town Center Design & Development Guide shall <br />be amended as follows: <br />Building Frontage <br />1. Where build -to lines govern, entries must face the street. Seventy (70) percent <br />of the block length must have building fronts, parks or plaza within the <br />required setback area. <br />2. Where build -to lines are shown on the Regulating Plan, buildings shall face <br />the street and shall occupy a minimum percentage of each block's linear street <br />(at least 50 percent or 70 percent), as noted in the Regulating Plan, within the <br />required setback area. <br />3. Buildings shall be sited a minimum of 5 feet and a maximum of 15 feet from <br />the public right-of-way. For buildings located on a corner, the secondary <br />frontage setback shall be allowed to exceed these maximum setbacks provided <br />the building architecture on the secondary frontage is upgraded to provide <br />upgraded materials such as board and batten or shakes in lieu of lap siding on <br />the top 1/2 of the elevation. <br />AND <br />Residence and Garage Setbacks <br />The following table summarizes minimum and maximum setbacks for residences and garages. <br />Table 7. Residence and Garage Setbacks (measured from lot line unless otherwise noted) <br />Structure <br />Setbacks <br />Side Setbacks <br />(excluding Street -Facing <br />Sides) <br />[1, 3] <br />Street -facing Front and Side <br />Setbacks [1, 2] <br />Rear Setbacks <br />RESIDENCE SETBACKS <br />
The URL can be used to link to this page
Your browser does not support the video tag.