06-26-2017 Council Packet (2) - Laserfiche WebLink

Home Search

a. A minimum of three (3) unique building facades (A, B and C) for each elevation of the townhomes shall be provided. b. A table of architectural facade data shall be included for each elevation. c. A unique building color package shall be included for each phase of development. d. At no point will the same facade and same color package be specified on buildings that are immediately adjacent to or directly across the road from each other. e. A minimum of 4 inch window trim on side and/or rear elevations to match the dimensions of the front elevation. f. In no case shall any exterior material be less than 10%. g. Front elevations shall have a combination of 3 exterior materials and/or styles as defined above. h. At least 60% (e.g. two of the three buildings) of the facades in each phase shall include brick, stone or stucco on the front elevation. i. Rear elevations shall have a combination of 2 exterior materials and/or styles. j. Rear elevations shall include some vertical trim or element to break up the longer horizontal planes. k. Side elevations that are exposed to roadways or open space and are highly visible will incorporate architectural details to match the front facade (e.g. the Tanager and the Maxwell Side (exposed)). 1. Side elevations that are not exposed to roadways or open space shall require only one exterior material (e.g. Maxwell (unexposed)). m. Decorative garage doors are required on all units. n. At least 60% of the buildings shall have decorative garage doors with windows for any given development phase. LOT SIZE 1. Lot sizes for single family lots shall be continuous buildable land and at a minimum size of the Lot Width Product x 130 feet. a. Example: i. 44 feet x 130 feet = 5,720 s.f. ii. 55 feet x 130 feet = 7,150 s.f. iii. 65 feet x 130 feet =8,450 s.f. iv. 75 feet x 130 feet = 9,750 s.f.