My WebLink
|
Help
|
About
|
Sign Out
Home
Search
06/09/2021 P&Z Packet
LinoLakes
>
Advisory Boards & Commissions
>
Planning & Zoning Board
>
Packets
>
2021
>
06/09/2021 P&Z Packet
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
9/16/2021 11:39:29 AM
Creation date
6/4/2021 3:08:52 PM
Metadata
Fields
Template:
P&Z
P&Z Document Type
P&Z Packet
Meeting Date
06/09/2021
P&Z Meeting Type
Regular
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
198
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
3.General Provisions VI <br /> §1007.059 WIND ENERGY CONVERSION SYSTEM(WECS) <br /> WECS that have a combined nameplate capacity of 5,000 kilowatts or more are regulated by the <br /> state,and are preempted from the regulations of this Section.This Section applies only to WECS <br /> that have a combined nameplate capacity of less than 5,000 kilowatts. <br /> (1) Purpose.The purpose of this Section is to establish predictable and balanced regulations <br /> for the establishment of WECS in the locations and circumstances under which the use may be <br /> established without detriment to the public health safety and welfare of neighboring property <br /> owners or occupants. <br /> (2) General Requirements. The following requirements shall apply to all WECS: <br /> a) WECS shall be allowed as an accessory structure. <br /> b) The monopole or building upon which the proposed WECS is to be mounted shall <br /> have the structural integrity to carry the weight and wind loads of the WECS and to accommodate <br /> its vibration impacts,as documented in writing by a licensed structural engineer. <br /> C) WECS and any related equipment shall comply with the noise regulations <br /> established in Section 1043.007 of the City Code. <br /> d) WECS shall be equipped with an overspeed control device. <br /> e) WECS, including the blades or rotors, shall be grounded and shielded in <br /> conformance with the National Electrical Code. <br /> fl The compatibility of the blades or rotors with the generator shall be certified by <br /> licensed engineer. <br /> g) WECS shall be filtered, shielded or otherwise designed and constructed so as not <br /> to cause electrical,radio frequency,television,or other communication signal interference. <br /> h) WECS and their related support and equipment shall be a non-contrasting color <br /> such as pale grey or white or shall have a galvanized finish to reduce visual impact, unless <br /> otherwise required by the Federal Aviation Administration. <br /> i) Except those devices required by the Federal Aviation Administration, no lights, <br /> reflectors,flashers or any other type of illumination shall be attached to a WECS or related support <br /> or equipment. <br /> j) Except for required safe, signage, no other signage, writing, pictures, flags, <br /> streamers,or decorative items shall be attached to a WECS or related support or equipment, <br /> k) WECS shall be self-supporting without the use of guy wires or similar features. <br /> 3-110 <br />
The URL can be used to link to this page
Your browser does not support the video tag.