Laserfiche WebLink
3. General Provisions_V1 <br /> <br />3-49 <br />3. A fence or wall not exceeding ten (10) feet in height may be erected on a rear lot <br />line or on a side lot line that is not adjacent to a street from a point where the front facade of a <br />principal building would intersect with a side lot line extending to the rear property line. <br /> <br />4. Should the rear lot line be common with the side lot line of an abutting lot, that <br />portion of the rear lot line equal to the required front yard setback of the abutting lot shall not be <br />fenced or walled to a height of more than four (4) feet. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />5. Within commercial and industrial and public/semi-public zoning districts, barbed <br />wire may be attached to the tops of fences or walls with the following conditions: <br /> <br />a. Fences or walls must be a minimum of eight (8) feet in height exclusive of the <br />security arm. <br /> <br />b. The security arm must be angled in such a manner that it extends only over the <br />property of the permit holder. <br /> <br />c. Wire security fencing shall not be permitted within the required front yard or <br />along a property line abutting a residential use. <br /> <br />(h) Public and Semi-Public District Fences or Walls. Fences or walls in the public and <br />semi-public districts may be erected in any yard to a height of eight (8) feet. Barbed wire fences <br />used for security purposes may be permitted in the public and semi-public zoning district per <br />§1007.043 (18)(g)5. of this Ordinance. <br />10’ fence <br />allowed <br />8’ fence <br />allowed <br />4’ fence <br />allowed street right of way <br />FENCES OR WALLS <br />IN BUSINESS AND <br />INDUSTRIAL ZONES <br /> <br />Diagram 7 abc