Laserfiche WebLink
--Accessory <br />5 ft <br />150 ft <br />Impervious Surface <br />30% <br />5.2-5.9% <br />'Only land above the OHWL can be used to meet the lot size standards <br />2Lot width standards are met at both the OHWL setback line and the front building <br />setback line <br />3One water -oriented accessory structure may be setback 75 feet from the OHWL and <br />outside the wetland buffer <br />4Per Shoreland Management Overlay District <br />The lots will have limited ability to construct accessory structures, decks or additions due <br />to the required OHWL setback, topography and wetland buffers. This shall e is noted <br />on the preliminary plat and shall be noted on the certificate of survey submitted with each <br />building permit. <br />In an R-X zoning district, a detached accessory structure is allowed at least 100 ft from <br />the CSAH 54/201h Avenue road right-of-way. <br />Building Requirements <br />At the time of building permit, the single family homes will be reviewed for compliance <br />regarding floor area, garage, design and construction standards and septic system design. <br />Subdivision Ordinance <br />Per City Code Section 1001.076(1), a subdivision which results in three or fewer <br />unsewered residential parcels, tracts or lots from one or two existing parcels, tracts or <br />lots, within unsewered residential areas of the city is a minor subdivision. A subdivision <br />that results in more than three lots from one or two existing lots shall be platted. <br />Four (4) unsewered residential parcels are proposed; therefore, a preliminary and final <br />plat are required. <br />Conformity with the Comprehensive Plan and Zoning Code <br />The preliminary plat and final plat are consistent with the comprehensive plan for urban <br />reserve development and zoning code requirements for R-X, Rural Executive as <br />discussed above. <br />Blocks and Lots <br />The preliminary plat and final plat contain Lots 1-4, Block 1, Lake Amelia Woods. <br />Ghost Plat <br />al <br />