02-07-2022 Council Work Session Packet

Home Search

1. The final plat substantially conforms to the approved preliminary plat subject to the conditions listed below. 2. The City Attorney has reviewed the status of title/property ownership related to the final plat and provided comments as noted below. 3. A Development Agreement has been drafted and shall be executed. 4. Conditions attached to approval of the preliminary plat have been fulfilled or secured by the Development Agreement. 5. All fees, charges and escrow related to the preliminary or final plat have been paid in full. BE IT FURTHER RESOLVED by the City Council of the City of Lino Lakes hereby approves NorthPointe 8t' Addition PUD Final Plan/Final Plat subject to the following conditions: 1. The existing conservation easement and wetland buffer declaration may be amended with approval from RCWD. 2. A Development Agreement and securities related to the final plat are required. 3. A Site Performance Agreement and securities related to NorthPointe Garden Estates are required or securities shall be collected with the Development Agreement. 4. A Declaration for Maintenance of Stormwater Facilities related to the private stormwater management facilities is required. 5. A Declaration of Covenants detailing age -restriction is required. 6. A temporary cul-de-sac easement and exhibit are required over the cul-de-sac. 7. Separate sign permit applications are required for all permanent monument/pylon and wall signage. 8. Separate sign permit applications are required for all temporary signage. 9. PUD, Planned Unit Development flexibility is provided to reduce the principal and accessory building setback along I-35E from 40ft to 20ft. 10. All parking stalls (surface, interior garage and detached garage) shall be provided rent free to all tenants. 11. The following noise mitigation standards apply: a. The building is constructed in such a way that the exterior to interior sound level attenuation is at least 30 dB(A). b. All housing units shall provide year-round climate control. c. STC 30 windows shall be used for all windows. d. Exterior wall construction shall consist of the following or comparable materials: i. APA rated sheathing located on the exterior side of the exterior wall. 1. This material will be 7/16" thick and a wood fiber material. ii. Exterior wall shall be 2x6 studs with R-21 batt insulation. iii. The inside finish shall be 5/8" gypsum board. iv. Lap siding shall have a thickness of .354" and be of a wood fibrous material. v. Trim around the windows shall have a thickness of .970" and be of a wood fibrous material.