08-01-2022 Council Work Session Packet

Home Search

Custom Fire Apparatus, Inc. lights shall be disabled with park brake engaged. The cable shall exit the light bar on the right side of the cab. There shall also be lightbar provisions for two (2) Whelen Mini Edge Ultra Freedom IV series forward facing lightbars mounted on the left and right side of the front cab roof, each at a 30 degree angle. Each lightbar shall be 21.50 inches in length. Each lightbar shall feature four (4) red LED light modules and one (1) clear LED light modules per lightbar. The clear lights shall be disabled with park brake engaged. The cables shall exit the lightbars near the center of each lightbar. GROUND LIGHTS Each door shall include a Tecniq T44 LED ground light mounted to the underside of the cab step below each door. The lights shall include a polycarbonate lens, a housing which is vibration welded and LEDs which shall be shock mounted for extended life. GROUND LIGHTS The ground lighting shall be activated when the parking brake is set, by the opening of the door on the respective cab side, and through a virtual button on the Vista display and control screen. LOWER CAB STEP LIGHTS The middle step located at each door shall include a Tecniq T44 LED light which shall activate with the opening of the respective door. The lights shall include a polycarbonate lens, a housing which is vibration welded and LEDs which shall be shock mounted for extended life. INTERMEDIATE STEP LIGHTS The intermediate step well area at the front doors shall include a TecNiq D06 LED light within a chrome housing. The front egress step lights shall provide visibility to the step well area for the first step exiting the vehicle. The Egress step lights shall activate with entry step lighting. MAP LIGHTS A Roxter gooseneck style map light shall be provided. The light shall have a clear bulb and a control switch on the base. The light shall be located on the right hand side of the dash. ENGINE COMPARTMENT LIGHT There shall be a LED NFPA compliant light mounted under the engine tunnel for area work lighting on the engine. The light shall include a polycarbonate lens, a housing which is vibration welded and a bulb which shall be shock mounted for extended life. The light shall activate automatically when the cab is tilted. DO NOT MOVE APPARATUS LIGHT The front headliner of the cab shall include a flashing red TecNiq K50 LED light clearly labeled "Do Not Move Apparatus". In addition to the flashing red light, an audible alarm shall be included which shall sound while the light is activated. The flashing red light shall be located centered left to right for greatest visibility. 07/26/22 -55-