08-01-2022 Council Work Session Packet

Home Search

The cab shall offer an exterior compartment on the left side of the cab behind the rear door. The compartment opening shall be 10.00 inches wide X 21.19 inches high. The compartment size shall be 11.34 inches wide X 21.19 inches high X 21.19 inches deep. The compartment shall have a 10.63 inch wide, 32.00 inch high and 1.50 inch thick hinged box pan style flush mount door with a bright aluminum tread plate inner panel and a bent D-ring slam latch. There shall be a switch to activate a light inside the compartment and the open compartment warning light in the cab in the event the door is left ajar. LEFT HAND EXTERIOR REAR COMPARTMENT LIGHTING There shall be one (1) SoundOff Signal brand LED strip light installed to illuminate the exterior rear compartment on the left side of the cab. The strip light shall be 10.00 inches long and shall include three (3) bright white Gen3 LEDs. LH EXTERIOR COMPARTMENT INTERIOR FINISH The interior of the left hand exterior compartment shall have a DA sanded finish. RH EXTERIOR REAR COMPARTMENT The cab shall offer an exterior compartment on the right side of the cab behind the rear door. The compartment opening shall be 10.00 inches wide X 21.19 inches high. The compartment size shall be 11.34 inches wide X 21.19 inches high X 21.19 inches deep. The compartment shall have a 10.63 inch wide, 32.00 inch high and 1.50 inch thick hinged box pan style flush mount door with a bright aluminum tread plate inner panel and a bent D-ring slam latch. There shall be a switch to activate a light inside the compartment and the open compartment warning light in the cab in the event the door is left ajar. RIGHT HAND EXTERIOR REAR COMPARTMENT LIGHTING There shall be one (1) SoundOff Signal brand LED strip light installed to illuminate the exterior rear compartment on the right side of the cab. The strip light shall be 10.00 inches long and shall include three (3) bright white Gen3 LEDs. RH EXTERIOR COMPARTMENT INTERIOR FINISH The interior of the right hand exterior compartment shall have a DA sanded finish. PUMP PANEL CUTOUT The rear wall of the cab shall include a cut out which allows for the pump panel of the apparatus body to protrude into the cab providing an enclosed operation area within the cab. The cutout shall be 70.00 inches wide and 25.50 inches tall from the bottom of the pump panel hood extension. CAB STRUCTURAL WARRANTY Purchaser shall receive a Cab Structure (Aluminum) Ten (10) Years or 100,000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0602. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request. CAB TEST INFORMATION The cab shall have successfully completed the preload side impact, static roof load application and frontal impact without encroachment to the occupant survival space when tested in accordance with Section 4 of SAE J2420 COE Frontal Strength Evaluation Dynamic Loading Heavy Trucks, Section 5 of SAE J2422 Cab Roof Strength Evaluation Quasi —Static Loading Heavy Trucks and ECE R29 Uniform Provisions Concerningthe he Approval of Vehicles with regard to the Protection of the Occupants of the Cab of a Commercial Vehicles Annex 3 Paragraph 5.