Laserfiche WebLink
The rear wall of the cab on the left and right sides shall include a window which shall measure 16.00 <br />inches in width X 16.00 inches in height. These windows shall be fixed within this space and shall be <br />square in shape. The windows shall be mounted using black self locking window rubber. <br />GLASS TINT REAR WALL OUTER UPPER <br />The windows located in the rear wall of the cab on the left and right outer upper corners shall include a <br />standard green automotive tint which shall allow seventy-five percent (75%) light transmittance. <br />GLASS UPPER SIDE REAR DOOR <br />Windows shall be provided in the upper portion of each rear door of the raised roof cab. Each window <br />shall measure 27.00 inches wide X 14.00 inches high and be installed above the lower door window. <br />The windows shall be rectangular in shape and fixed within this space. The windows shall be mounted <br />using black self-locking window rubber. <br />GLASS TINT UPPER SIDE REAR DOOR <br />The window located in the upper section of the rear crew doors shall include a standard green <br />automotive tint which shall allow seventy-five percent (75%) light transmittance. <br />GLASS UPPER SIDE REAR <br />The upper portion on the left and right sides towards the rear of the cab shall include a window which is <br />8.00 inches wide X 14.00 inches high. These windows shall be fixed within this space. The windows <br />shall be oblong in shape and be mounted using black self-locking window rubber. <br />GLASS TINT UPPER SIDE REAR <br />The window located in the upper section on the side of the cab towards the rear shall include a standard <br />green automotive tint which shall allow seventy-five percent (75%) light transmittance. <br />GLASS UPPER SIDE REAR PPHE <br />The left and right sides of the pump panel hood extension shall include a 16.00 inch wide X 16.00 inch <br />tall window. These windows shall be fixed within this space. The windows shall be square and be <br />mounted using black self-locking window rubber. <br />GLASS TINT UPPER SIDE REAR PUMP PANEL HOOD EXTENSION <br />The windows located on the left and right sides of the pump panel hood extension shall include a <br />standard green automotive tint which shall allow seventy-five percent (75%) light transmittance. <br />GLASS REAR WALL CENTER <br />The center rear wall of the cab shall include a window which is 41.00 inches in width X 16.00 inches in <br />height. This window shall be fixed and be of a rectangular shape. The window shall be mounted using <br />black self locking window rubber. <br />GLASS TINT REAR WALL CENTER <br />The window located in center of the rear wall shall include a standard green automotive tint which shall <br />allow seventy-five percent (75%) light transmittance. <br />CLIMATE CONTROL <br />A ceiling mounted combination defroster and cabin heating and air conditioning system shall be located <br />above the engine tunnel area. The system covers and plenums shall be of severe duty design made of <br />