08-01-2022 Council Work Session Packet

Home Search

The headlights and marker lights shall be controlled via a virtual button on the Vista display. The rotary/joystick control of the Graphical Instrument Cluster shall function as a dimmer to adjust the brightness of the dash lights. The headlamps shall be equipped with the "Daytime Running" light feature, which shall illuminate the headlights when the ignition switch is in the "On" position and the parking brake is released. LIGHTBAR SWITCH The light bar shall be controlled through the master warning switch. INTERIOR OVERHEAD LIGHTS The cab shall include a LED dome lamp located over each door. The lights shall include push switches on each lamp to activate both the clear and red portions of the light individually. INTERIOR OVERHEAD LIGHTS ACTIVATION The clear portion of each lamp shall be activated by opening the respective door. AUXILIARY DOME LIGHT FRONT CENTER The cab shall include a Whelen LED dome lamp as an auxiliary dome light. The dome lamp shall be rectangular in shape and shall measure approximately 7.00 inches in length X 3.00 inches in width with a black colored bezel. The auxiliary dome light shall be located over the engine tunnel. The light shall include push buttons to activate both the clear and red portions of the light individually. AUXILIARY DOME LIGHT FRONT CREW The cab shall include two (2) LED auxiliary dome lights in the headliner inboard of the rear facing crew seat. The clear portion of each lamp shall be activated by opening the rear cab doors and both the red and clear portion can be activated by individual push switches on each lamp. AUXILIARY DOME LIGHT MID CREW The cab shall include two (2) LED auxiliary dome lights on the headliner in the middle of the crew area inboard of the outer seating positions. The clear portion of each lamp shall be activated by opening the rear cab doors and both the red and clear portion can be activated by individual push switches on each lamp. LIGHTBAR PROVISION There shall be one (1) light bar installed on the cab roof. The light bar shall be provided and installed by the chassis manufacturer. The light bar installation shall include a lowered mounting that shall place the light bar just above the junction box and wiring to a control switch on the cab dash. CAB FRONT LIGHTBAR MODEL The cab shall be provided with one (1) Whelen model F4N81 light bar. The light bar shall be 81.00 inches in length and setup in a standard NFPA 1901 configuration. See the light bar layout for specific details. CAB FRONT LIGHTBAR The lightbar provisions shall be for one (1) Whelen brand Freedom IV LED lightbar mounted centered on the front of the cab roof. The lightbar shall be 81.00 inches in length. The lightbar shall feature six