Laserfiche WebLink
<br />214 <br />a. Principal Building. 10 feet. <br /> <br />b. Accessory Building. 5 feet. c. Parking Lot. 5 feet. <br />4. Zero Lot Line. Side yard setback requirements shall not be applied to a common <br />wall of multi-family dwelling units. 5. From Low Density Residential. The principal buildings setback shall be 35 feet from any land guided for low density residential. <br /> <br />(e) Buffer. Where a side or rear lot line abuts land guided for low density residential, a collector street, or an arterial street, a 20-foot-wide buffer shall be provided in compliance with City Code Section 1007.043(17). <br />(3) Maximum Impervious Surface Coverage. 65 percent of the lot area. <br /> (4) Building Requirements. (a) Floor Area. The minimum livable floor area for each multiple-family dwelling unit <br />shall be 700 square feet plus 100 additional square feet for each bedroom. <br /> (b) Utility Area. Dwellings with dedicated individual access shall be required to provide an additional 100 square feet of floor area to house utilities, unless a basement is present. Dwellings with shared access shall be required to provide adequate floor area within the building <br />to house utilities. <br /> (c) All dwelling units shall have parking provided in compliance with City Code Section 1007.044(6). <br />(d) All dwellings shall comply with the Design and Construction Standards of City Code <br />Section 1007.043(2). (5) Maximum Building Height. The greater of three (3) stories or 40 feet, except as allowed by City Code Section 1007.043(3). <br /> <br />(6) Permitted Uses. The following are permitted uses in the R-3 District: (a) Day care facilities serving 14 or fewer persons. <br />(b) Multiple-family dwellings containing eight (8) units or less. <br /> (c) Public parks.