Laserfiche WebLink
<br />228 <br />§ 1007.096 R-6, MANUFACTURED HOME PARK DISTRICT. <br /> <br />(1) Purpose. The purpose of this district is to provide opportunities where manufactured housing may be located on a leased or rented site in a planned community. This district is intended to provide opportunities for almost all types of manufactured homes including those which may not be able to meet the design standards established in other residential districts. All manufactured <br />home parks are required to conform to the provisions of this section and other appropriate sections <br />of this ordinance. Land to be zoned R-6 and any new manufactured home park shall be served with public sanitary sewer and water and the density of the park shall be consistent with the land use category according to the comprehensive plan. <br />(2) Lot and Setback Requirements. <br /> (a) Minimum Park Size. Five (5) acres. (b) Minimum Lot or Site Size. 6,000 square feet per unit exclusive of roadways, <br />walkways or other property used for park purposes. <br /> (c) Minimum Lot or Site Width. 60 feet. (d) Setbacks. <br /> <br />1. From Public Street Right-of-Way. a. Local or Minor Collector Street. 30 feet. <br />b. Major Collector or Arterial Street. 40 feet. <br /> 2. Front Lot Line. a. Private Street. 20 feet. <br /> <br />b. Common Park Walk. 10 feet. 3. Rear Lot Line. 10 feet. <br />4. Side Lot Line. 10 feet. Side yard setback for interior lot lines may be reduced to <br />zero, if it is part of an overall park plan to maximize private yard space for each unit. This zero side yard setback allowance will only be permitted if the distance to the manufactured home that shares that side lot line is at least 30 feet in distance. <br />5. There shall not be less than 20 feet of space between manufactured homes in all <br />directions. 6. From Low Density Residential. The principal building setback shall be 35 feet