Laserfiche WebLink
18 <br />(e) LI, Light Industrial, GI, General Industrial, and BC, Business Campus Zoning Districts <br />Sign Type Single and Double Occupancy <br />Buildings <br />Multi-Occupancy Building <br />Requirements <br />Ground Signs <br />Individual sign allowed only if business <br />is not part of integrated retail complex. <br />If single building has three (3) or more <br />businesses, it must comply with <br />§ 1010.006(11) <br />Ground signs of any type totaling two (2) square feet per frontage foot up to a <br />maximum sign area of 200 square feet. <br /> <br />Maximum sign height of 40 feet. <br />Shall not be closer than 50 feet to another ground sign. <br />Building Wall Sign <br />Total wall sign area shall not exceed: <br />100 square feet or 10% of the building façade area, whichever is greater <br />Wall signs are permitted on any façade <br />that is not directly adjacent to a <br />residential zone. For the purposes of this <br />section a road shall constitute a <br />separation of zones. <br />Sign for individual business only if <br />business has separate entrance. Maximum <br />sign size applies to that tenant’s wall area <br />and signs are permitted only on a facade <br />that is not directly adjacent to a residential <br />zone. For purposes of this section a road <br />shall constitute a separation of zones. <br />No illuminated sign may face land zoned residential or guided residential by the <br />comprehensive plan. For the purposes of this section a road shall constitute a <br />separation of zones. <br /> <br />No wall sign higher than parapet wall. <br /> <br />Property Setback No sign may be closer than five (5) feet to any lot line. <br /> <br /> <br /> <br />(2) In PUD, Planned Unit Development Districts, permanent signs are regulated according <br />to the standards for the corresponding land use and zoning category as stated in this