Laserfiche WebLink
Table 2 Permanent Sign Requirements. All permanent signs shall be subject to the following <br /> requirements: <br /> (a) Rural and Residential Zoning Districts <br /> R Rural, R-X Rural Executive,R-1, R-1X, R-2,R-3, <br /> Sign Type R-4, R-5 and R-6 Residential Districts Requirements, <br /> Identification <br /> One (1)per residence to assist with navigation. <br /> or Nameplate Maximum sign area of two (2) square feet. <br /> Signs <br /> No sign permit is required. <br /> One(1) ground sign may be placed at entrances to a neighborhood by a <br /> homeowners' association, developer, or other person or entity with ownership or <br /> control over the property; the number of the signs per neighborhood shall be <br /> Signs at determined by the city,with consideration for the number of entrances to the <br /> Neighborhood neighborhood. <br /> Entrances <br /> Maximum sign area of 24 square feet. <br /> Maximum height of six(6) feet. <br /> Each property with a residence may have one (1) ground sign,temporary or <br /> permanent, without a permit. The maximum size is six(6) square feet. This sign <br /> may be an on-premise sign or a sign containing only non-commercial speech. <br /> There is no time limit for such a sign. <br /> Ground Signs <br /> In addition, non-residential uses and licensed residential care facilities that are <br /> allowed by the Zoning Ordinance, and manufactured home parks in R-6 zones, <br /> may have one (1) ground sign with a maximum sign area of 50 square feet. <br /> The maximum height of the sign shall be eight(8) feet. <br /> Building Wall Non-residential uses and licensed residential care facilities that are allowed by <br /> Signs the Zoning Ordinance, and manufactured home parks in R-6 zones, may have <br /> one (1)wall sign on one (1)building,maximum 80 square feet. <br /> Property No sign shall be closer than ten(10) feet to any lot line. <br /> Setback <br /> 13 <br />