Laserfiche WebLink
(e) LI,Light Industrial,GI,General Industrial,and BC,Business Campus Zoning Districts <br /> Sign Type Single and Double Occupancy Multi-Occupancy Building <br /> Buildings Requirements <br /> Individual sign allowed only if business If single building has three(3)or more <br /> is not part of integrated retail complex. businesses, it must comply with <br /> § 1010.006(11) <br /> Ground signs of any type totaling two(2)square feet per frontage foot up to a <br /> maximum sign area of 200 square feet. <br /> Ground Signs <br /> Maximum sign height of 40 feet. <br /> Shall not be closer than 50 feet to another ground sign. <br /> Total wall sign area shall not exceed: <br /> 100 square feet or 10%of the building façade area,whichever is greater <br /> Sign for individual business only if <br /> Wall signs are permitted on any façade business has separate entrance.Maximum <br /> that is not directly adjacent to a sign size applies to that tenant's wall area <br /> residential zone.For the purposes of this and signs are permitted only on a facade <br /> section a road shall constitute a that is not directly adjacent to a residential <br /> Building Wall Sign separation of zones. zone. For purposes of this section a road <br /> shall constitute a separation of zones. <br /> No illuminated sign may face land zoned residential or guided residential by the <br /> comprehensive plan.For the purposes of this section a road shall constitute a <br /> separation of zones. <br /> No wall sign higher than parapet wall. <br /> Property Setback No sign may be closer than five(5)feet to any lot line. <br /> (2) In PUD,Planned Unit Development Districts,permanent signs are regulated according <br /> to the standards for the corresponding land use and zoning category as stated in this <br /> 18 <br />