Laserfiche WebLink
Test Procedure Results <br />Fire FM 4880 Passed: Class 1 Fire Rating of Building Panels or Interior Finish Materials* <br /> FM 4882 Passed: Smoke Sensitive Occupancies Interior and Exterior Use* <br /> ASTM E84 Flame Spread: 25 or Less / Smoke Developed: 90 or Less <br /> CAN/ULC-S101 Fire Endurance Tests: 10 min (Fastener conditions vary depending on product thickness.  <br /> Please contact technical.NA@kingspanpanels.com for detailed information.) <br /> CAN/ULC-S102 Flame Spread: 20, Smoke Developed: 45 for panel insulation core <br /> CAN/ULC-S138 Passed: Fire growth of foamed plastic insulated building panels in a full scale room <br /> configuration <br /> CAN/ULC-S134 Passed: Standard method of test for fire of exterior wall assemblies <br /> NFPA 259 Tested for potential heat of building materials <br /> NFPA 285 Passed: Standard Fire Test Method for Evaluation of Fire Propagation Characteristics <br /> of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components <br />Structural FM 4881 Passed. For complete wind pressure ratings please contact Kingspan Technical Services <br /> or refer to ApprovalGuide.com* <br /> ASTM E72 Vacuum chamber tested. Panel load / span and deflection tables are available <br />Thermal ASTM C518 <br />Transmission <br /> <br />Air Infiltration ASTM E283 0.003 CFM/ft2 of Panel Area at 6.24 psf <br />Water ASTM E331 No uncontrolled water penetration at 20 psf differential pressure <br /> AAMA 501.1 Dynamic water pressure testing – no sign of water leakage at 15 psf <br />Bond Strength ASTM D1623 Panels tested for tensile bond strength of metal to foam <br /> Sample placed in an autoclave device and pressurized to 2 PSI at 218°F for 21/2 hours <br />Skin Delamination No skin delamination with direct pull off pressure up to 1188 psf <br />Performance Testing and Approvals <br />Kingspan insulated panels featuring QuadCore® Technology meet specific building envelope performance criteria and requirements <br />stipulated by US and Canadian building codes. <br />QuadCore® KS Granitstone® Data Sheet <br />Insulated Wall Panel System <br />*Thickness: 2”-6”, Width: 24”-42”, Min. panel length: 8’, Min. gauge: Exterior 26 ga, Interior 26 ga. <br />For FM compliance, systems must be installed in accordance with FM installation specifications as detailed on ApprovalGuide.com.  <br />Please contact technical.NA@kingspanpanels.com for detailed information or refer to ApprovalGuide.com. <br />Thermal Performance at 35°F mean temperature <br />Thickness R-Value <br />2 18 <br />2.5 22.5 <br />3 27 <br />4 36 <br />5 45 <br />6 54 <br />Thermal Performance at 75°F mean temperature <br />Thickness R-Value <br />2 16 <br />2.5 20 <br />3 24 <br />4 32 <br />5 40 <br />6 48 <br />Contact Details <br />DeLand, FL: 877-638-3266 <br />Modesto, CA: 800-377-5110 <br />www.kingspanpanels.us <br />Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. <br />Suggestions for, or description of, the end use or application of products or methods of working are for information only and Kingspan Limited and its subsidiaries accept no liability in respect thereof. <br />® Kingspan, the Lion Device, and QuadCore are Registered Trademarks of the Kingspan Group plc in the US, Canada and other countries. All rights reserved. © Kingspan Insulated Panels Inc. <br />Caledon, ON: 866-442-3594 <br />Langley, BC: 877-937-6562 <br />www.kingspanpanels.ca <br />For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com <br />To ensure you are viewing the most recent and accurate product information, please visit www.kingspanpanels.com <br />Issue 4: 09/2022 <br />15