01-08-2018 Council Meeting Packet

Home Search

management plan and consistency with § 1102.09. (f) Centralization and design of facilities. Centralization and design of facilities and structures must be done according to the following standards. 1. Planned unit developments must be connected to publicly owned water supply and sewer systems. 2. Dwelling units or sites must be clustered into one or more groups and located on suitable areas of the development. They must be designed and located to meet or exceed the following dimensional standards for the relevant shoreland classification, setback from the ordinary high water level, elevation above the surface water features and maximum height. 3. Shore recreation facilities, including but not limited to swimming areas, docks and watercraft mooring areas and launching ramps, must be centralized and located in areas suitable for them. The shared lake access must be approved by the City Council. Evaluation of suitability must include consideration of land slope, water depth, vegetation, soils, depth to groundwater and bedrock or other relevant factors. The number of spaces provided for continuous beaching, mooring or docking of watercraft must not exceed one for each allowable dwelling unit or site in the first tier (notwithstanding existing mooring sites in an existing commercially used harbor). Launching ramp facilities including a small dock for loading and unloading equipment, may be provided for use by occupants of dwelling units or sites located in other tiers. 4. Structures, parking areas and other facilities must be treated to reduce visibility as viewed form public waters and adjacent shorelands by vegetation, topography, increased setbacks, color or other means acceptable to the City Council, assuming summer, leaf-on conditions. Vegetative and topographic screening must be preserved, if existing, or may be required to be provided. 5. Accessory structures and facilities, except water-oriented accessory structures, must meet the required principal structural setbacks and must be centralized. 6. Water-oriented accessory structures and facilities may be allowed if they meet or exceed design standards contained in § 1102.07(2) of this chapter and are centralized. (5) Conversions. The city may allow existing resorts or other land uses and facilities to be converted to residential planned unit developments if all of the following standards are met. (a) Proposed conversions must be initially evaluated using the same procedures for residential planned unit developments involving all new construction. Inconsistencies between existing features of the development and these standards must be identified. (b) Deficiencies involving water supply and sewage treatment, structure color, impervious coverage, open space and shore recreation facilities must be corrected as part of the conversion or as specified in the conditional use permit. (c) Shore impact zone deficiencies must be evaluated and reasonable improvements made as part of the conversion. These improvements must include, where applicable, the following: 1. Removal of extraneous buildings, docks or other facilities that no longer need to be located in shore impact zones; 2. Remedial measures to correct erosion sites and improve vegetative cover and screening of buildings and other facilities as viewed from the water; and 3. If existing dwelling units are located in shore impacts zones, conditions shall be attached to approvals of conversions that preclude exterior expansions in any dimension or substantial alterations. The conditions must also provide for future relocation of dwelling units, where feasible, to other locations, meeting all setback and elevation requirements when they are rebuilt or replaced. (d) 1. Existing dwelling unit or dwelling site densities that exceed standards in division (4) may be allowed to continue but must not be allowed to be increased, either at the time of conversion or in the