Laserfiche WebLink
Application Rate Guidelines <br />How to use the table on page 17: <br />1. Select the row with the appropriate pavement temperature, <br />temperature trend, and weather conditions. <br />2. Select the column that has the type of material you are us- <br />ing. <br />3. Find the box where the row and columns intersect to find <br />the application rate. These rates are not fixed values, but <br />rather the middle of a range to be selected and adjusted by <br />your agency according to your local conditions and experi- <br />ence. <br />4. Compare those values to the calibration chart for your <br />truck. <br />5. Dial the correct setting for the rate indicated on the Applica- <br />tion Rate Guidelines. <br />6. If you are not treating a 24- foot -wide road (typical two -lane <br />road), adjust the rate as follows: for application on a single <br />lane, cut rates in half. For an 18- foot -wide road, use 34 of the <br />listed rate (i.e., multiply rate by 0.75). <br />18 <br />• <br />to <br />