Laserfiche WebLink
• <br />• <br />human - scale, typically not to exceed 16 feet or 4 feet in height, respectively. However, lighting <br />must be at least 3 feet in height in order to be visible in deep snow drifts or snow banks. <br />Seating Areas. Where intimate environments are desired (e.g. seating areas in parks and plazas, <br />and some pedestrian walkways), light bollards and other forms of indirect illumination are <br />appropriate. <br />Bollards <br />Lighting bollards are recommended for illuminating pedestrian walkways, parks and plazas. <br />Bollards must have a diameter of approximately 8 inches and a height of between 3 -4 feet, to <br />avoid being obstructed by snow. Around the light source near the top of the bollard, horizontal <br />louvers must be used to stylistically complement the luminaries and direct light downward. <br />Concrete finishes shall not be used for lighting bollards. <br />Submittal Requirements and Design Review <br />A lighting plan prepared by a qualified lighting consultant shall be submitted for design review <br />All lighting and their methods of installation shall be reviewed and approved by the City. <br />Each owner/ tenant will be responsible for the design, fabrication, and installation of lights on <br />private property. Owner /Tenant shall submit three (3) sets of professionally executed sign <br />drawings for approval by the Planning Department. These drawings shall be of a scale of 1/8 ":1' <br />or larger, showing light locations, size, layout, design, lamp colors, and materials. The <br />Owner /Tenant shall meet all City permit and fee requirements for lights prior to installation of <br />any light. <br />DRAFT — 2/6/04 35 PAGINATION TO BE ADJUSTED <br />