Laserfiche WebLink
• ' STEEL <br />CRO N@ E TM POLES <br />• <br />• <br />• <br />Square, non- tapered pole <br />Carbon steel <br />base plate <br />Square Steel Poles <br />12" <br />(305 mm) <br />1 1 <br />Two-piece steel <br />otG. base plate cover <br />Pole cap <br />(Supplied if tenon <br />is riot used) <br />2 "x 6" <br />(51 turn x152mm) <br />Hand hole <br />Hand -hole cover <br />Slotted anchor <br />bolt hole <br />H fit) x W (in) x Wall (in) <br />I SPEC 4 PS3S10C(a)BZ 10 x 3 x 0.125 <br />Q SPEC # PS3S15C(a)BZ 15 x 3 x 0.125 <br />SPEC 4 PS3S19C(a)BZ 19 x 3 x 0.125 <br />Q SPEC 4 PS4S10C(a)BZ 10 x 4 x 0.125 <br />u SPEC 4 PS4S15C(a)BZ 15 x 4 x 0.125 <br />[a SPEC r PS4S19C(a)BZ 19 x 4 x 0.125 <br />E SPEC 4 PS4S22C(a)BZ 22 x 4 x 0.125 <br />SPEC 4 PS4S25C(a)BZ 25 x 4 x 0.125 <br />SPEC 4 PS4S25S(a)BZ 25 x 4 x 0.188 <br />SPEC # PS4S27C(a)BZ 27 x 4 x 0.125 <br />r SPEC # PS4S30S(a)BZ 30 x 4 x 0.188 <br />Q SPEC 4 PS5S25S(a)BZ 25 x 5 x 0.188 <br />E SPEC # PS5S30S(a)BZ 30 x 5 x 0.188 <br />0� SPEC 4 PS6S30S(a)BZ 30 x 6 x 0.188 <br />x <br />9g— —�� SPEC # configuration. <br />!� SPEC 4 <br />RAL DESCRIPTION <br />Non - tapered steel poles are supplied with <br />welded base with cover, four galvanized anchor <br />bolts, masonite mounting template and a pole <br />cap (except tenon mount). Each bolt is provided <br />with two washers and two nuts. Steel pole base <br />has slotted holes. Per National Electrical Code <br />requirements, pole is standard with a 2" x 6" <br />(51 x 152 mm) hand hole, located 12" (305 mm) <br />above bottom of pole base. A #10 -32 stainless - <br />steel weld stud with grounding lug is located <br />inside pole, opposite hand hole; a hand hole <br />cover is supplied but shipped separately. For <br />EPA ratings, see 'Windloading" sheet. <br />US 5,820,255; 6,640,517 <br />H (m) x W (mm) x Wall (mm) <br />3.0x76x3 <br />4.6x76x3 <br />5.8 x 76 x 3 <br />3.0 x 102 x 3 <br />4.6x102x3 <br />5.8x102x3 <br />6.7x102 x3 <br />7.6x102 x3 <br />7.6x102 x5 <br />8.2x102 x3 <br />9.1 x 102 x 5 <br />7.6x127x5 <br />9.1 x 127 x5 <br />9.1 x152x5 <br />Notes <br />a) PO CON MUMTION <br />1 -I Single (direct mount) 5 • Triple (direct mount) <br />2 M Twin @ 180 °direct mount) 6 Quad (direct mount) <br />3 Twin @ 90° (direct mount" T Tenon (order tenon separately) <br />For fixtures with fixed 20° mount, add prefix 2 to configuration numbers: <br />i.e. 21, 22, 23, 25 and 26. <br />MIMS; <br />Square, non - tapered pole of structural steel tubing <br />(ASTM A 500); with a minimum yield strength of <br />46,000 p.s.i. Welded to a formed carbon steel <br />base plate with a minimum yield strength of <br />36,000 p.s.i. <br />Exclusive DeltaGuard® finish features an E -coat <br />epoxy primer with medium bronze ultra - durable <br />powder topcoat, providing excellent resistance to <br />corrosion, ultraviolet degradation and abrasion. <br />The finish is covered by our seven -year limited <br />warranty. <br />9201 Washington Avenue Racine, Wisconsin 53406 -3772 USA PHONE (262) 886 -1900 <br />REC <br />FEB 2 8 2005 <br />CITY OF LINO LAKES <br />LABE <br />Ruud Lighting square poles meet or exceed <br />National Electrical Code Requirements. In the <br />US, Ruud square poles are classified by <br />Underwriters Laboratories Inc. for electrical <br />ground bonding; in Canada, they are CSA <br />certified for electrical ground bonding and <br />structural strength. <br />SSORY <br />Catalog # REC -GFIBZ <br />(120V) <br />Wet Listed In -use cover <br />FAX (262) 884 -3309 <br />© Ruud Lighting Inc. Printed in USA <br />www.ruudlighting.com <br />9/1/04 <br />GFI Outlet <br />Accessory <br />RUUD <br />LIGHTING <br />