05/11/2005 P&Z Packet - Laserfiche WebLink

Home Search

• ,1,1,71•ete building permit in the development or when the particular development is ninety percent (90 %) sold or rented, whichever is sooner. Each sign shall not exceed the following size limitations; project area under ten (10) acres - 32 square feet; project area over ten (10) acres - 140 square feet. (Amended 6- 5-86. Ord. 86 -934) (1) Anoka County Airport Signs. (Entire Section Amended 6 -5 -86. Ord. 86 -934) (1) Wall Signs: (a) The total area of all wall signs on any wall of a commercial licensed building shall not exceed 15% of the wall area of that wall when said wall area does not exceed 500 square feet. When said surface area exceeds 500 square feet, then the total area of such wall sign shall not exceed 75 square feet plus 5% of the wall area in excess of 500 square feet, provided that the maximum sign area for any wall sign shall be 200 square feet. Wall area shall be computed individually for each tenant in a multi- tenant building based on the exterior wall area of the space that tenant occupies. (b) A commercial licensed building having a wall which faces a runway of the airport shall be permitted a wall sign not to exceed 30% of the wall area facing the runway with a maximum of 300 square feet. Only one such sign shall be allowed per commercial licensed building. (c) The total area of all wall signs on any wall of a hangar building, not possessing a commercial license shall not exceed 5% of the wall area of that wall. Such signs shall contain identification information and may not contain advertising information. (2) Freestanding Signs: (a) Only one freestanding accessory sign for each commercial licensed building site per public street frontage shall be permitted. One freestanding accessory sign located along the runway side shall also be permitted for each commercial licensed building. The total area of each freestanding sign shall not exceed 80 square feet. The maximum height of freestanding signs shall be 20 feet subject to Part 77 of Federal Air Regulations (to provide for air space requirements). The sign shall be set back 10 feet from the lot line. (3) Gate Identification Signs: (a) One sign per gate provided the total area of any sign shall not exceed 32 square feet and a maximum height of 10 feet. (4) Area Directional Signs: (a) One sign listing locations of all commercial licensed businesses per street frontage is allowed, provided the total area of any sign shall not exceed 80 square feet and a maximum height of 10 feet. And further provided that only commercial licensed businesses are listed. (5) Review Process: (a) A sign request will be reviewed and approved by the Planning Department after review by and approval of the Metropolitan Airports Commission is received. (6) Non - conforming or Illegal Signs: • (a) Existing as of the date of adoption shall be required to comply with these regulations 3 years from the date of adoption. 34.00 -7 01/04/01 zol