Laserfiche WebLink
• <br />Zoning Requirements and Standards <br />The PUD provides flexibility from the strict standards of the zoning ordinance; however, <br />the proposed development shall model the R -2 District regulations. <br />Building Design Standards <br />The following building design standards shall apply to the single family lots. <br />1. Floor Area. The minimum footprint area, less garage area, for single <br />and two family dwelling units shall be as follows: <br />a. Single Family Dwellings. <br />• 3 Bedroom Rambler 1,050 square feet <br />R -2 <br />Required <br />Proposed <br />Min. Lot Size (sq. ft.) <br />7,500 <br />8,060 <br />Min. Lot Width (feet) <br />- Interior Lot <br />60 <br />62 <br />-Corner Lot <br />80 <br />Varying 80 +' <br />Min. Lot Depth (feet) <br />125 <br />130 <br />Building Setback <br />(feet) <br />-From Streets <br />- -Local Street <br />25 <br />NA <br />-- Collector or Arterial <br />40 <br />40 <br />-Rear <br />-- Principal <br />25 <br />25 <br />-- Accessory <br />5 <br />5 <br />-Side <br />-- Principal <br />10 <br />10 <br />-- Accessory <br />5 <br />5 <br />Buffer <br />15' if side or <br />rear lot abuts <br />collector or <br />arterial street <br />Required <br />Building Design Standards <br />The following building design standards shall apply to the single family lots. <br />1. Floor Area. The minimum footprint area, less garage area, for single <br />and two family dwelling units shall be as follows: <br />a. Single Family Dwellings. <br />• 3 Bedroom Rambler 1,050 square feet <br />