12/11/2013 P&Z Packet - Laserfiche WebLink

Home Search

• • Building Design Standards The developer is proposing several different housing models and product types for both the 65/70 foot wide lots and the 50 foot wide lots to provide customers with options and development variations. The following building design standards shall apply to the single family lots as minimum PUD standards which mirror the R -2 District. 1. The minimum footprint, less garage area, for a single family dwelling unit shall be as follows: 3 Bedroom Rambler 2 Bedroom Rambler 1 -1/2 Story Split Foyer/Entry Split Level - 3 level minimum Two Story 1,050 square feet 1,010 square feet 980 square feet 980 square feet 980 square feet 850 square feet 2. All dwellings without basements in this district shall be required to provide an additional one hundred (100) square feet of floor area to house utilities. 3. All dwellings shall have a double garage at a minimum. 4. All dwellings shall comply with the Design and Construction Standards of Section 3, Subd. 4.B. Garages. All single family dwellings shall have a double garage and shall comply with the following: a. Compliance with the Building Type and Construction Standards of Section 3. Subdivision 4.B, and b. All garages, except side or rear loaded garages, shall not protrude forward of the front wall of the house, unless the house includes a front porch that is unenclosed, a minimum of 8 feet in depth, and extends across 100 percent of the front facade of the house. The garage shall then not protrude forward of the front porch, and c. If the garage door faces the street, the length of the garage wall facing the street shall not be greater than fifty percent (50 %) of the length of the entire front facade of the structure; except on houses that comply with all of the following conditions: 1) The second floor living space extends over the two -car portion of