09/22/2003 Council Packet - Laserfiche WebLink

Home Search

• e) Land shall be developed in increments of workable size such that adequate erosion and siltation controls can be provided as construction progresses. The smallest practical area of land shall be exposed at any one period of time. Where the topsoil is removed, sufficient arable soil shall be set aside for respreading over the developed area. The topsoil shall be restored to a depth of at least four (4) inches and shall be of a quality at least equal to the soil quality prior to development. g) The Developer shall install four (4) inches of topsoil on all boulevards and seed or sod as approved by the City. The Developer shall make all necessary adjustments to the curb stops to bring them flush with the topsoil prior to occupancy. h) All disturbed areas shall be seeded. i) The front 50 feet of the lots, the street right -of -way, storm water storage ponds, and surface water drainage ways shall be graded prior to commencement of utility construction. • j) Drainage swales, ditches, storm water storage ponds and other high risk erosion areas shall be protected from erosion. k) All remaining grading must be completed prior to issuance of building permits. 1) Protect streets from erosion deposits. This should include a combination of roadside silt fences, roadside sod strips, catch basin rock bale inlet protection, rock construction entrances, straw mulch, and/or street sweeping. m) The Developer's engineer shall certify, in writing with an as- built survey, that all grading complies with the grading plan prior to issuance of building permits. 5. Final street grading, subbase, gravel base, bituminous binder course, and concrete curb and gutter. 6. Storm sewers when determined to be necessary by the City Engineer, including all necessary laterals, catch basins, inlets and other appurtenances. 7. Sanitary sewer, laterals or extensions, including all necessary building services and other appurtenances.