Laserfiche WebLink
• <br />175MI-1 <br />175 watt metal halide <br />multitap ballast for <br />120/208/240/277 <br />250MH <br />250 watt metal halide <br />multitap ballast for <br />120/208/240/277 <br />400MH <br />400 watt metal halide <br />multitap ballast for <br />120/208/240/277 <br />Use mogul base clear <br />E -18 or E -28 lamps only. <br />Note: Horizontal reflec- <br />tors used with a metal <br />halide lamp require a pin <br />oriented lamp. <br />Lamps not included. <br />150HPS <br />150 watt high pressure <br />sodium multitap ballast <br />for 120/208/240/277 <br />200HPS <br />200 watt high pressure <br />sodium multitap ballast <br />for 120/208/240/277 <br />250HPS <br />250 watt high pressure <br />sodium multitap ballast <br />for 120/208/240/277 <br />400HPS <br />400 watt high pressure <br />sodium multitap ballast <br />for 120/208/240/277 <br />Note: Use mogul base <br />clear E-28 or E18 lamps. <br />Lamps not included. <br />347 volt ballasts <br />available. <br />ALN 445C <br />ALN 445 -H2 <br />ALN 445-H3 <br />ALN 445- H5...... <br />ALN445 Arm or Post Top Mount <br />CLEAR ACRYLIC LENS (USE COATED LAMPS) <br />CLEAR LENS, TYPE 2 HORZ. CUTOFF REFLECTOR <br />CLEAR LENS, TYPE 3 HORZ. CUTOFF REFLECTOR <br />CLEAR LENS, TYPE 5 HORZ. CUTOFF REFLECTOR <br />POST TOP FIXTURES: <br />The standard cast fitter slips over a 5 inch diameter pole. <br />DIMENSIONS <br />POST TOP <br />22 •DIA x 41" <br />560MM DIA X 1040MM <br />ARM MOUNTED <br />22 "ola x 36" <br />560MM DIA. x 915MM <br />WEIGHT: 52 POUNDS <br />EPA: 3.45 <br />ALN445D Top Mounted Arm or Pendant <br />\` <br />ALN 445DC <br />ALN 445D -H2 <br />ALN 445D -H3 <br />ALN 445D -H5 <br />CLEAR ACRYLIC LENS <br />CLEAR LENS, TYPE 2 HORZ. CUTOFF REFLECTOR <br />CLEAR LENS, TYPE 3 HORZ. CUTOFF REFLECTOR <br />CLEAR LENS, TYPE 5 HORZ. CUTOFF REFLECTOR <br />Options <br />LDL <br />HSS -L <br />HSS -R <br />CHM <br />CND <br />TNA <br />MAT <br />PMC <br />347 <br />Lightly diffused lens for fixture models with a clear lens, refractors or <br />reflectors. <br />House side shield for fixtures with glass refractors or clear lens only, consist <br />of three field installed panels attached to the inside of the lens. Installing all <br />three panels blocks 180 degrees of the lens. <br />House side shield for fixtures with reflectors is factory installed. <br />Glass chimney with brass holder. <br />3 lamp candelabra with polished brass holder. Lamps included. For decora- <br />tive purposes only. Not electrically wired. <br />Tenon adapter 4' (100mm) tall with six s.s. set screws. Specifiy the od of the <br />pole or tenon (by others). <br />Mast arm adapter for a ALN445D slips over a 2 " /52mm diameter pipe and is <br />secured with four stainless steel set screws. <br />Pendant kit for ALN445D includes with canopy and 36" of brass chain. <br />347 volt HID ballast <br />9 <br />DIMENSIONS <br />ARM MOUNT <br />22 "DIA x 36" <br />560MM DIA. x 915MM <br />WEIGHT: 52 POUNDS <br />EPA: 3.45 <br />