07/15/2004 Env Bd Packet - Laserfiche WebLink

Home Search

.1 G 7. HOW TO GET TO THE SITE Attach a simple site locator map. If needed, include on the map written directions to the site from a known location or landmark. Include highway and street names and numbers. Also provide distances from known locations and. any other information that would assist in locating the site. Label the sheet SITE LOCATOR MAP. See Narrative 8. PURPOSE OF PROJECT: What do you propose to do, and why is it needed? Please be brief. (See HELP 8before completing Ski section,) t See Narrative L` 9. PROPOSED TIMELINE: Approximate project start date: June 1, 2001 Projected end date: June 1, 2002 r 10. PROJECT DESCRIPTION: Describe in detail what you plan to do and how you plan to do it. This is the most important 1 pad of your application. See HELP 10 before completing this section; see also What To Include on Plans (Instructions, page 2). If space below is not adequate, attach separate sheet labeled PROJECT DESCRIPTION. See Narrative 11. FOOTPRINT OF IMPACT (if applicable): Indicate total amount (in acres or square feet) of wetland(s) or water body area(s) to be filled, drained, inundated or excavated; and/or indicate length of stream or river affected (in linear feet). 0.07 acres or 3240 square feet and/or linear feet Wetland will be bridged. Five piers will support the bridge, a total footprint of 3240 square feet. 12. TYPE AND ESTIMATED AMOUNT OF MATERIAL(S) TO BE PLACED /NT00R EXC4VATED FROMTHE WETLAND OR WATER BODY (if applicable): List each type of material (such as rock, sand, clay, concrete) to be filled or excavated, and estimate amount in cubic yards. 0 FILLING 0 EXCAVATING LiType(s) of material Estimated amount in cubic yards concrete bridge N/A iers Type(s) of material Estimated amount in cubic yards 13. ESTIMATED PROJECT COST: $620,000 ri (for determination of DNR fees only, which are based on total project cost)