07/25/2007 Env Bd Packet - Laserfiche WebLink

Home Search

• • (c) Name, address and phone number of party responsible for maintenance of all erosion and sediment control measures. (d) Identif+sationClear identification of all temporary erosion and sediment control measures which will remain in place until permanent vegetation is in placeestablished. Examples of temporary measures include, but are not limited to: Seedingseeding with perennial vegetation, mulching, sodding, silt fence, erosion control matting, and hay bale filter barricrsblanketing, and stormwater inlet protection devices. (e) IdentifieatienClear identification of all permanent erosion control measures such as outfall spillways and riprap shoreline protection, and their lecationjocations. (f) For projects over -five- acres -e graded arc, Clear Identification of staging areas, as applicable. (g) Documentation that the project applicant has applied for a National Eliminati Permit from the Minnesota Pollution Control Agency (MPCA), when applicable. (h) A Storm Water Pollution Prevention Plan for projects that require an NPDES Permit, (g) Tabulation . _ .. _ . _ Delineation of any floodplain volume and /or wetland area changes. '' e-•- - - •• ai• I 5. CONSTRUCTION ACTIVITY REQUIREMENTS The Permittee must follow the standards of the NPDES permit regarding erosion prevention, sediment contro dewatering, and BMP maintenance for any project requiring a permit by the District. i}. EXCEPTIONS. unit residential -and- tecs than five acres in size for tingle family recidentia� ` '�"4st lil-1,000 feet of a (3)- Is- within 300 -f, off Ric Creek, 6. INSPECTIONS L) The permittee will routinely inspect project sites as required by the NPDES permit, implementing additional erosion and sediment control measures, as conditions required to assure retention of sediment on site. The permitte- will keep an inspection I• • on site as required by the NPDES permit. tpl The permittee shall be responsible for inspection maintenance and effectiveness of all erosion and sediment control measures until final soil stabilization full completion of the project, or permit assi • I u - I - whichever comes first. (See Rule B for permit assignment requirements.) COI in order to ensure that sediment is retained on -site. the District may inspect the site and require the •ermittee to •rovide additional erosion control measures where site conditions warrant. 7. FINAL STABILIZATION W. Erosion and sediment control measures must be maintained until final veae ation and ground cover is established to a density of 70 %, DRAFT DOCUMENT 23