2005-063 Council Resolution - Laserfiche WebLink

Home Search

DRAFT 5/2/05 III. Sign Plan Data A. Description: 1. Apollo Landing 2. 540 Lilac St. - Lino Lakes 3. Graphic scale will be per exhibit B. Existing and Proposed Conditions: 1. At present, there are no existing freestanding or ground signs. 2. Proposed pylon sign, located to the West of main entrance, will total two hundred (200) square feet of sign area and will not exceed forty (40) feet in height and will not be closer than five (5) feet to property line. The Pylon Sign will conform to building design standards relating to composition, color, building materials and overall continuity with the Planned Unit Development. See Exhibit 1 Site identification mav be added on the base or ton of the pylon sign in addition to the 200 sf . 3. Proposed individual Business signs will be attached to the building wall up to one hundred (100) square feet or twenty percent (20 %) of the building face area, whichever is greater. Variations on face colors, size and font style of letters is allowed within the guidelines, color of all returns and Trim Caps to be Bronze. SeeExhibit 2: Channel Letter on Race - Way. Signs will be substantially in line horizontally with roofline and/or parapet line to maintain aesthetic continuity. One additional Business sign will be allowed for buildings with a secondary exposure, on the back or side of building, up to fifty (50) square feet or ten percent (10 %) of the building face area, whichever is greater. The additional sign shall be for the tenant behind the wall giving the secondary exposure. For example, a sign on the end of a building shall be only for the business located on the end of the building. Specifications other than size are the same as Primary signage However, no signs shall be allowed on the northern walls of buildings 1, 2, 3, or 4 and no signs shall be allowed on the west side of building 1. Siis shall not be allowed on the east side of building 4 that are less than 100 feet from the north border of Lot 4. 4. All building wall signage will use 3M Scotchcal Translucent Film Series 230 or similar for color. SeeExhibit.3. C. General Regulations: 1. All signs shall be constructed in conformance with the provisions of the Uniform Sign Code published by the International Conference of Building Officials. 2. Sits shall not be painted directly to any exterior building surface, but shall be on a separate frame except for temporary display windows. 3. No sign shall be installed, which by reason of position, shape of color would conflict with proper function or interpretation of any traffic sign or signal. 4. There shall be no use of revolving beacons, flashing signs, zip flashers or similar lighted devices. Apollo Landing Site Design Standards page 10 • Deleted: Exhibit 3 .• Deleted: Exhibit 4