Laserfiche WebLink
c. The entire structure, including any base material, must be designed to be <br />easily moved if deemed necessary by the city. <br />d. Removal of an accessory structure or portion thereof for the purpose of <br />utilizing the easement shall be at the property owner's expense. <br />6. In Rural and Residential districts, Gazebos that are attached to the dwelling by a <br />raised deck, porch, or patio shall not be counted towards the maximum area or number of <br />accessory structures allowed on a site, so long as the sides of the gazebo remain at least 50%, <br />though the open areas may be covered with screens. <br />7. In Rural and Residential districts, Fabric structures are considered an accessory <br />structure and are therefore counted towards the maximum area and number of accessory <br />structures allowed on a site. <br />(b) Sport Courts. In all Rural and Residential districts, the following standards shall <br />apply to outdoor sport courts, whether temporary or permanent: <br />1. A building permit shall be required for all private residential sport courts. <br />2. An application for a building permit or a conditional use permit shall include a <br />site plan showing the following along with all required information: <br />a. The size, shape, pavement and sub -pavement materials. <br />b. The location of the court. <br />c. The location of the house, garage, fencing, septic systems and any other <br />structural improvements on the lot. <br />d. The location of structures on all adjacent lots. <br />e. A grading plan showing all revised drainage patterns and finished elevations <br />at the four corners of the court. <br />f. Landscaping and turf protection around the court. <br />g. <br />Location of existing and proposed wiring and lighting facilities. <br />3. Sport courts shall not be located closer than ten (10) feet to any side and rear lot <br />line. Sport courts shall not be located within any required front yard or side yard abutting a <br />street. <br />3-16 <br />