11-24-14 Council Packet - Laserfiche WebLink

Home Search

e. No metal sheet/panel siding with vertical orientation except upon tool sheds less than one hundred fifty (150) square feet in area. Metal horizontal lap siding is acceptable. f. Fabric or vinyl canopy structures acceptable. g. Roof and exterior color and material compatible with home (except manufactured tool shed). h. Lots that have shared ownership/membership in the Lino Airpark may have a three thousand two hundred (3,200) square foot accessory building as an airplane hangar provided that: i. The hangar be earth tone in color. ii. The hangar conform to Building Code standards for hangar use. iii. The hangar location has direct taxiway access to the Lino Airpark runway. (j) Commercial and Industrial Zoning Districts. The following establishes the maximum number, size, and height of accessory buildings allowed in the commercial and industrial zoning districts: 1. Only one (1) accessory building shall be allowed not to exceed four hundred (400) square feet except when intended for storage of buses. 2. Building setbacks shall not exceed base district requirement. 3. Building height shall be limited to twelve (12) feet maximum except when intended for storage of buses per § 1007.043 (2)(b)2. of this Ordinance. 4. Metal buildings and pole barns are prohibited. 5. Roof and exterior color and material shall be compatible with the principal structure. 6. Accessory buildings on commercial/industrial sites shall be limited to typical accessory storage uses, no auxiliary commercial/ industrial use shall be allowed within an accessory storage building. 7. Site and building plan review shall not be required for accessory building construction as an accessory building that meets the requirements listed herein shall be considered a minor project for the purposes of § 1007.019 (1) of this Ordinance. 8. Accessory buildings shall not be located within an easement. 3-23