Laserfiche WebLink
4) No metal sheet/panel siding with vertical orientation except <br />upon tool sheds less than four hundred (400) square feet in <br />area. Metal horizontal lap siding is acceptable. <br />5) Twenty-four (24) feet maximum height. <br />6) Roof and exterior color and material compatible with home <br />(except manufactured metal tool shed). <br />e. One and One -Quarter (1 1/4) Acres to Two and One -Half (2 1/2) <br />Acres (R, R-X, R-1, R-1X, R-EC, R-2, R-3, R-4, R-6, and R-7 <br />Districts) <br />1) The combination of accessory buildings and garages shall <br />not exceed two thousand twenty (2,020) square feet. <br />2) Total allowable accessory building space shall be limited to <br />the following: <br />a) One (1) attached garage and <br />b) Two (2) detached accessory structures <br />3) Attached garages shall not exceed one thousand one <br />hundred twenty (1,120) square feet or equal to ninety (90) <br />percent of the size of the house foundation, whichever is <br />greater. <br />4) No metal sheet/panel siding with vertical orientation except <br />upon tool sheds less than one hundred fifty (150) square <br />feet in area. Metal horizontal lap siding is acceptable. <br />5) Twenty-four (24) feet maximum height. <br />6) Roof and exterior color and material compatible with home <br />(except manufactured metal tool shed). <br />7) Lots that have shared ownership/membership in the Lino <br />Airpark may have a three thousand two hundred (3,200) <br />square foot accessory building as an airplane hangar <br />provided that: <br />a.) The hangar be earth tone in color. <br />Lino Lakes Zoning Ordinance General Provisions <br />3-23 <br />