2003-008 Council Ordinances - Laserfiche WebLink

Home Search

1 The light source shall be hooded or controlled so as not to light adjacent property in excess of the maximum intensity defined by this Ordinance. 2) Bare Tight bulbs shall not be permitted in view of adjacent property or public right-of-way, unless part of a permanent or decorative fixture. b. Business/Industrial District Standards. Any lighting used to illuminate a structure, an off-street parking area, or other area shall be arranged so as to deflect light away from any adjoining residential property or from any public right-of-way. All lighting shall be installed in accordance with the following provisions: 1) The luminaire shall contain a cutoff which directs and cuts off the light at an angle of ninety (90) degrees or less. 2) Light sources shall not be permitted so as to light adjacent property in excess of the maximum intensity defined in Section 3, Subd. 4.F.4 of this Ordinance. 3) Architectural/historical light fixtures that feature globes that are not shielded, or lighting of entire facades or architectural features of a building may be approved by the City Council. In no case shall the light affect adjacent property in excess of the maximum intensity defined in Section 3, Subd. 4.F.4 of this Ordinance. 4) The maximum height of the fixture and pole above the ground grade permitted for light sources is thirty (30) feet. A light source mounted on a building shall not exceed the height of the building. In no case shall the height of a light source mounted on a pole or on a building exceed the height limits of the zoning district in which the use is located, unless allowed by conditional use permit. 5) Location. a) The light source of an outdoor light fixture shall be set back a minimum of ten (10) feet from a street right-of- way and five (5) feet from an interior side or rear lot line. Lino Lakes Zoning Ordinance General Provisions 3-29