My WebLink
|
Help
|
About
|
Sign Out
Home
Search
11-23-2015 Council Packet
LinoLakes
>
City Council
>
City Council Meeting Packets
>
1982-2020
>
2015
>
11-23-2015 Council Packet
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
1/13/2016 9:23:08 AM
Creation date
11/24/2015 4:12:14 PM
Metadata
Fields
Template:
City Council
Council Document Type
Council Packet
Meeting Date
11/23/2015
Council Meeting Type
Regular
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
99
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
(e) Once the Floodway and Flood Fringe District boundaries have been determined, <br />the Zoning Administrator must process the permit application consistent with the <br />applicable provisions of § 1103.05 and 1103.06 of this chapter. <br />§ 1103.08 LAND DEVELOPMENT STANDARDS. <br />(1) In general. Recognizing that flood prone areas may exist outside of the designated <br />floodplain districts, the requirements of this section apply to all land within the City of <br />Lino Lakes. <br />(2) Subdivisions. No land may be subdivided which is unsuitable for reasons of <br />flooding or inadequate drainage, water supply or sewage treatment facilities. <br />Manufactured home parks and recreational vehicle parks or campgrounds are considered <br />subdivisions under this chapter. <br />(a) All lots within the floodplain districts must be able to contain a building site <br />outside of the Floodway District at or above the regulatory flood protection elevation. <br />(b) All subdivisions must have road access both to the subdivision and to the <br />individual building sites no lower than two feet below the regulatory flood protection <br />elevation, unless a flood warning emergency plan for the safe evacuation of all vehicles <br />and people during the regional (1% chance) flood has been approved by the City Council. <br />The plan must be prepared by a registered engineer or other qualified individual, and <br />must demonstrate that adequate time and personnel exist to carry out the evacuation. <br />(c) For all subdivisions in the floodplain, the Floodway and Flood Fringe District <br />boundaries, the regulatory flood protection elevation and the required elevation of all <br />access roads must be clearly labeled on all required subdivision drawings and platting <br />documents. <br />(d) In the General Floodplain District, applicants must provide the information <br />required in § 1103.07 (2) of this chapter to determine the regional flood elevation, the <br />Floodway and Flood Fringe District boundaries and the regulatory flood protection <br />elevation for the subdivision site. <br />(e) If a subdivision proposal or other proposed new development is in a flood prone <br />area, any such proposal must be reviewed to assure that: <br />1. All such proposals are consistent with the need to minimize flood damage <br />within the flood prone area, <br />2. All public utilities and facilities, such as sewer, gas, electrical, and water <br />systems are located and constructed to minimize or eliminate flood damage, and <br />3. Adequate drainage is provided to reduce exposure of flood hazard. <br />(3) Building sites. If a proposed building site is in a flood prone area, all new <br />construction and substantial improvements (including the placement of manufactured <br />homes) must be: <br />15 of 25 <br />
The URL can be used to link to this page
Your browser does not support the video tag.