12-28-2015 Council Packet - Laserfiche WebLink

Home Search

3.02 RESTRICTIONS A. Conform to MnDOT Section 2360.5B, except as modified herein: 1. All surfaces checked and approved by the Engineer prior to paving. 2. Existing bituminous surfaces must be dry prior and during placement of any bituminous pavements. 3. Wearing course shall not be placed when the air temperature in the shade and away from artificial heat, is 50 degrees F or less, unless otherwise approved by the Engineer. 3.03 EQUIPMENT A. Conform to MnDOT Section 2360.5C. 3.04 TREATMENT OF SURFACE A. Bituminous Tack coat shall conform to MnDOT Spec. 2357, except as modified herein. B. Restrictions: 1. The tack coat shall not be applied when the road surface is wet or when the weather conditions are unsuitable. 2. The area for tack coat application shall be limited as directed by the Engineer. 3. The Contractor shall have sole responsibility of claims of tack coat on personal property due to lack of notification or signage of the area being tack coated. C. Equipment: 1. Conform to MnDOT Spec. 2321.3C1. D. Road Surface Preparation: 1. Conform to MnDOT Spec. 2357.3C. E. Application: 1. At a uniform rate conforming to MnDOT Spec. 2357.3D1, but not greater than 0.05 gallon per square yard. 2. Along the front edge of the concrete curb and gutter, prior to placement of bituminous base. 3.05 PAVEMENT DENSITY A. Conform to MnDOT Section 2360.6, except as modified herein: 1. Pathways, driveways, small parking lots, leveling courses, and patching shall conform to Section 2360.6C - Ordinary Compaction Method. B. Vibrating steel drum roller and a pneumatic tired roller employed in conjunction with each other during compaction of all wear courses. 3.06 SURFACE SMOOTHNESS REQUIREMENTS A. Conform to MnDOT Section 2360.7, except as modified herein: 1. Delete Section 2360.7C Pavement Smoothness. END OF SECTION FLEXIBLE PAVING (MUNICIPAL PROJECTS) © 2015 Stantec 1 193803415 32 12 01 - 3