HomeMy WebLinkAboutResolution 24-002 CITY OF LINO LAKES
RESOLUTION NO. 24-02
Determining Intent of City Code Chapter 1007 Relating to
Building Type and Construction-Exterior Wall Finishes
WHEREAS, the City Council acting as the Board of Adjustment and Appeals received a
land use application for appeal regarding interpretation of intent of City Code Section
1007.043(2)(d) relating to Building Type and Construction-Exterior Wall Finishes; and
WHEREAS, the applicant is proposing to use Insulated Metal Panels (IMP's) for a
building addition at 424 Apollo Drive and staff does not believe the proposed exterior materials
meet the zoning code intent or requirements; and
WHEREAS, City Code Section 1007.043(2)(d) details the following:
• City Code Section 1007.043(2)(d)1. Definitions.
Architectural metal cladding. Refers to decorative, metal cladding systems such as copper,
zinc, titanium, stainless steel and painted steel components fixed to the outside of the primary
wall system.
• City Code Section 1007.043(2)(d)2: All sides of the principal and accessory structures are to
have essentially the same or a coordinated harmonious finish treatment.
• City Code Section 1007.043(2)(d)3: Classes of Primary Materials. For the purpose of this
section, primary materials shall be divided into class 1, class 2, and class 3 categories as
follows:
Classes of Materials
Class 1 Class 2 Class 3
Brick Precast concrete panels with at Exterior Insulation and
least two architectural reveals per Finish Systems (EIFS)
panel
Glass, or other Specialty concrete block including Fiber Cement Exterior
glazing materials textured, burnished block or rock Siding
faced block
Natural or cultured Ceramic Tile (masonry, stone or Glass Block
stone clay),
Architecturally Masonry Stucco
textured concrete
1
precast or poured in
place panels
Architectural metal cladding Wood
Other materials not listed that are of equal quality to materials in a specific class
may be approved for use by the Community Development Director
• City Code Section 1007.043(2)(d)5. Complete or partial buildings comprised of structural
metal wall panel systems that act as the primary wall system, or as a complete wall system
such as pole barns or similar structures common to agricultural or industrial storage uses are
prohibited.
• City Code Section 1007.043(2)(d)18. Replacement of non-conforming materials on existing
buildings, or expansions of less than 50% of the floor area of an existing building may use the
same or superior materials as existing.
NOW, THEREFORE, BE IT RESOLVED by the City Council of Lino Lakes, Minnesota the
following:
1. The proposed Insulated Metal Panels (IMP's) do not meet the city code intent or
requirements for Class 1 or Class 2 materials.
2. The proposed Insulation Metal Panels (IMP's) could be categorized as a Class 3
material.
3. The existing building and proposed addition shall have a coordinated harmonious
finish treatment.
Adopted by the City Council of the City of Lino Lakes this tle‘ day of JA tevIA ---1'✓1
2024. J
.IN> tN-
Ro fferty, Mayor
ATTEST:
Jolt n Chaika, City Clerk
2