Laserfiche WebLink
I. Allowing the development to operate in concert with a redevelopment plan in certain <br />areas of the City and to ensure the redevelopment goals and objectives will be achieved. <br />J. Higher standards of site and building design than would otherwise be provided under <br />conventional land development technique. <br />§ 154.752 ALLOWED DEVELOPMENT. <br />Uses within the PUD may include only those uses generally considered associated with the <br />general land use category shown for the area on the official Comprehensive Land Use Plan. <br />Specific allowed uses and performance standards for each PUD shall be delineated in an <br />ordinance and development plan. The PUD development plan shall identify all the proposed land <br />uses and those uses shall become permitted uses with the acceptance of the development plan. <br />Any change in the list of uses approved in the development plan will be considered an <br />amendment to the PUD, and will follow the procedures specified in Article 5, Section 154.105 <br />for zoning amendments. <br />A. Permitted Uses. The PUD application shall identify all proposed land uses and those uses <br />shall become permitted uses upon the approval of the planned unit development. <br />B. Placement of Structures. More than one principal building may be placed on a platted lot <br />within a planned unit development. The appearance and compatibility of buildings in <br />relation to one another, other site elements, and surrounding development shall be <br />considered in the review process. <br />C. Development Intensity. The PUD may provide for an increase in the maximum gross <br />floor area or floor area ratio by up to 20% of that allowed in the base zoning district, for <br />the purpose of promoting project integration and additional site amenities. <br />D. Density. The PUD may provide for an increase in density of residential development by <br />up to 20% of that allowed in the base zoning district, for the purpose of promoting <br />diversity of housing types and additional site amenities. Increased residential densities of <br />varying levels will be awarded based upon the provision of a combination of various site <br />amenities outlined in § 154.209. In addition, the eCity retains the right to evaluate all <br />proposals for bonus density in accordance with the overall goals of the eCity's Land Use <br />Element of the Comprehensive Plan. <br />E. Building Setbacks. The PUD may provide for a reduction in or elimination of required <br />setbacks in the base zoning district, provided that a landscaped setback area of the <br />minimum width established for the base zoning district is maintained along the periphery <br />of the adjacent zoning district(s). <br />F. Lot Requirements. The City Council may authorize reductions in the area and width of <br />individual lots within a PUD from that required for the base zoning district, provided that <br />such reductions are compensated for by an equivalent amount of open space or other <br />public amenities elsewhere in the planned unit development. Any open space shall not <br />include areas designated as public or private streets. The plan may increase the maximum <br />density beyond that permitted in the base zoning district for the purpose of promoting an <br />integrated project with a variety of housing types and additional site amenities. <br />G. Other Exceptions. As part of PUD approval, the City Council is authorized to approve <br />other exceptions to the zoning controls applicable to the base zoning district, such as the <br />maximum height of structures or the minimum off-street parking requirements. Such <br />23 <br />