08-228.9 Did NOT Pass - Laserfiche WebLink

Home Browse Search

Notes to VMX District Table a. No development may exceed the residential density range as specified in the Comprehensive Plan for the Village Mixed Use land use category. b. Two-family units may be side -by -side with a party wall between them ("twin") or located on separate floors in a building on a single lot ("duplex"). The per -unit measurements in this table apply to "twin" units, whether on a single lot or separate lots. The standards for single-family detached dwelling shall apply to a "duplex" containing two vertically - separated units on a single lot. c. In the case of single-family attached dwellings that are not situated on individual lots, minimum lot size shall be applied to each unit as a measure of density; i.e. 1 unit per 2,500 square feet. This standard is also used for multifamily dwellings. d. Buildings up to 45 feet in height may be permitted as part of a PUD. e. The front yard setback for single family homes shall be 25 feet. f, Side yard setbacks in the VMX District apply only along lot lines abutting residentially zoned parcels or those parcels with residential uses as the sole use. g. Comer properties: the side yard fagade of a comer building adjoining a public street shall maintain the front setback of the adjacent property fronting upon the same public street, or the required front yard setback, whichever is less. If no structure exists on the adjacent property, the setback shall be shown in the table. h. The total number of housing units or residential density in any development shall not exceed the maximum density allowed by the land use classification as designated in the Ci1y's Comprehensive Plan. SECTION 3. The City Council of the City of Lake Elmo hereby ordains that Title XV: Land Usage; Chapter 154: Zoning Code, Section 154.511 is hereby amended by changing the following sections (Proposed language is underlined, deleted language is shown with Stf iketlffauo: § 154.511 LOT DIMENSIONS AND BUILDING BULK REQUIREMENTS. Lot area and setback requirements shall be as specified in Table 14-2: Lot Dimension and Setback Requirements, Mixed Use -Commercial and Mixed Use -Business Park Districts. Table 14-2: Lot Dimension and Setback Requirements, Mixed Use -Commercial and Mixed Use - Business Park Districts.