2024-13 - Laserfiche WebLink

Home Browse Search

d) Surface area. The maximum area of all temporary signs displayed shall be a combined total of eight square feet if displayed for ten days or longer. e) Location. FeamperaYy signs shall be l r open flue--pr-®triises-to svltioh-tfie--special Y•gn�y-0%_lY.0 i4 a 4 •{ .{ k fie. 1 :n 1.. NO temporary sign may be placed off -premises except as otherwise provided elsewhere in this section. f) Duration. No temporary sign permit shall be issued to erect or maintain any temporary si na e for period exceeding 21 da g g 1> g Y, { ^t tc ...h:^h the .. .. ..{ •., h• h first. A permit for temporary sign or signs shall be granted no more than four times in any calendar year and only once every three months. g) Installation requirements. All temporary signs shall be constructed, anchored and supported in a manner which reasonably prevents the possibility of such signs becoming hazards to the public health and safety as determined by the plarYning—community development -director. a) LC^ G. "L. L• 0 L L L B s L e m a La•- L o _ c• L F L .. L. e) frem-thc--date-the-business-opened,-cbRagedn mes-,�ership. 2. Portable signs. In addition to the general requirements pertaining to temporary signs, the following standards pertain to portable signs: a) Permit required. A sign permit shall be issued on an ammal basis before a stationary portable sign may be erected. Such permit shall only be valid during the calendar year during which it is issued. b) Construction. A sign shall be manufactured to a professional standard of construction, finish and graphics. A portable sign shall be freestanding, self -supported and constricted of substantial materials such as wood, metal or plastic such that the sign will reasonably withstand the elements. c) Size and design regulations. 1. A portable sign shall not exceed six square feet in surface area per side, with a maximum of two signable sides or faces. 2. The sign shall not exceed three feet measured at the widest point of the sign face. 3. Any portion of the sign's face used for a chalk or dry -erase board shall not exceed 50 percent of the total sign face surface area.