|
SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY PSI
<br />HUNTER MP CORNER PROS-04-PRS40
<br />TURF ROTATOR, 4IN. POP-UP, PRESSURE REGULATED TO 40
<br />PSI, MP ROTATOR NOZZLE. T=TURQUOISE ADJ ARC 45-105
<br />ON PRS40 BODY.
<br />3 40
<br />HUNTER MP1000 PROS-04-PRS40
<br />TURF ROTATOR, 4IN. POP-UP WITH CHECK VALVE,
<br />FLOGUARD, PRESSURE REGULATED TO 40 PSI, MP
<br />ROTATOR NOZZLE ON PRS40 BODY. M=MAROON ADJ ARC 90
<br />TO 210, L=LIGHT BLUE 210 TO 270 ARC, O=OLIVE 360 ARC.
<br />2 40
<br />HUNTER MP2000 PROS-04-PRS40
<br />TURF ROTATOR, 4IN. POP-UP, PRESSURE REGULATED TO 40
<br />PSI, MP ROTATOR NOZZLE ON PRS40 BODY. K=BLACK ADJ
<br />ARC 90-210, G=GREEN ADJ ARC 210-270, R=RED 360 ARC.
<br />27 40
<br />HUNTER MP3000 PROS-04-PRS40
<br />TURF ROTATOR, 4IN. POP-UP, PRESSURE REGULATED TO 40
<br />PSI, MP ROTATOR NOZZLE ON PRS40 BODY. B=BLUE ADJ
<br />ARC 90-210, Y=YELLOW ADJ ARC 210-270, A=GRAY 360 ARC.
<br />7 40
<br />HUNTER MP3500 PROS-04-PRS40-CV-F
<br />TURF ROTATOR, 4IN. POP-UP WITH FACTORY INSTALLED
<br />CHECK VALVE, FLOGUARD, PRESSURE REGULATED TO 40
<br />PSI, MP ROTATOR NOZZLE ON PRS40 BODY. LB=LIGHT
<br />BROWN ADJUSTABLE ARC, 90-210.
<br />1 40
<br />HUNTER MP800SR PROS-04-PRS40
<br />TURF ROTATOR, 4IN. POP-UP, PRESSURE REGULATED TO 40
<br />PSI, MP ROTATOR NOZZLE ON PRS40 BODY. ADJ=ORANGE
<br />AND GRAY ( ARC 90-210), 360=LIME GREEN AND GRAY (ARC
<br />360)
<br />42 40
<br />HUNTER MP815 PROS-04-PRS40
<br />TURF ROTATOR, 4IN. POP-UP, PRESSURE REGULATED TO 40
<br />PSI, MP ROTATOR NOZZLE ON PRS40 BODY. M=MAROON
<br />AND GRAY ADJ ARC 90 TO 210, L=LIGHT BLUE AND GRAY 210
<br />TO 270 ARC, O=OLIVE AND GRAY 360 ARC.
<br />24 40
<br />SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY PSI GPM
<br />HUNTER PGP-ADJ-B 8.0
<br />TURF ROTOR, 4IN. POP-UP. ADJUSTABLE AND FULL CIRCLE.
<br />STANDARD ANGLE BLUE NOZZLE.
<br />19 25 6
<br />SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY
<br />HUNTER ICZ-101-40 W/ EZ-1 DECODER
<br />DRIP CONTROL ZONE KIT. 1IN. ICV GLOBE VALVE WITH 1IN.
<br />HY100 FILTER SYSTEM. PRESSURE REGULATION: 40PSI.
<br />FLOW RANGE: 2 GPM TO 20 GPM. 150 MESH STAINLESS
<br />STEEL SCREEN.
<br />3
<br />AREA TO RECEIVE DRIPLINE
<br />HUNTER HDL-09-12-CV
<br />HDL-09-12-CV: HUNTER DRIPLINE W/ 0.9 GPH EMITTERS AT
<br />18" O.C. CHECK VALVE, DARK BROWN TUBING W/ BLACK
<br />STRIPING. DRIPLINE LATERALS SPACED AT 18" APART, WITH
<br />EMITTERS OFFSET FOR TRIANGULAR PATTERN. INSTALL
<br />WITH HUNTER PLD BARBED OR PLD-LOC FITTINGS.
<br />1,342 LF
<br />SYMBOL MANUFACTURER/MODEL/DESCRIPTION QTY
<br />HUNTER PGV-100-MB W/ EZ-1 DECODER 1"
<br />PLASTIC ELECTRIC REMOTE CONTROL VALVE. MALE
<br />THREAD X BARB INLET/OUTLET. GLOBE CONFIGURATION,
<br />1
<br />HUNTER PGV-151 GLOBE W/ EZ DECODER 1-1/2"
<br />1-1/2IN. PLASTIC ELECTRIC REMOTE CONTROL VALVE.
<br />FEMALE NPT INLET/OUTLET, WITH FLOW CONTROL. GLOBE
<br />CONFIGURATION.
<br />2
<br />HUNTER HQ-44RC 1"
<br />QUICK COUPLER VALVE, YELLOW RUBBER COVER, RED
<br />BRASS AND STAINLESS STEEL, WITH 1IN. NPT INLET,
<br />2-PIECE BODY.
<br />2
<br />HUNTER PC-400
<br />TWO WIRE CONTROLLER
<br />1
<br />HUNTER WSS
<br />WIRELESS SOLAR, RAIN FREEZE SENSOR WITH OUTDOOR
<br />INTERFACE. INSTALL PER MANUFACTURER'S
<br />RECOMMENDATIONS. COORDINATE MOUNTING LOCATION
<br />WITH BUILDING CONTRACTOR AND OWNER'S
<br />REPRESENTATIVE.
<br />1
<br />POINT OF CONNECTION 2"1
<br />IRRIGATION LATERAL LINE: PVC CLASS 160 SDR 26 2,106 LF
<br />IRRIGATION MAINLINE: PVC CLASS 200 SDR 21 546.3 LF
<br />PIPE SLEEVE: PVC CLASS 200 SDR 21 38.1 LF
<br />T
<br />M L O
<br />K G R
<br />B Y A
<br />LB
<br />800 A 800 F
<br />M L O
<br />8.0
<br />C
<br />SS
<br />#"
<br />#
<br />Valve Number
<br />Valve Size
<br />Valve Flow
<br />Valve Callout
<br />#
<br />IRRIGATION SCHEDULE
<br />NUMBER MODEL SIZE TYPE GPM PSI PSI @ POC PRECIP
<br />1 HUNTER PGV-151 GLOBE W/ EZ DECODER 1-1/2"1-1/2"TURF ROTARY 36.56 50.8 51.0 0.43 in/h
<br />2 HUNTER ICZ-101-40 W/ EZ-1 DECODER 1"AREA FOR DRIPLINE 1.82 43.1 0.97 in/h
<br />3 HUNTER ICZ-101-40 W/ EZ-1 DECODER 1"AREA FOR DRIPLINE 5.16 45.5 1.12 in/h
<br />4 HUNTER PGV-151 GLOBE W/ EZ DECODER 1-1/2"1-1/2"TURF ROTARY 7.2 47.0 0.4 in/h
<br />5 HUNTER ICZ-101-40 W/ EZ-1 DECODER 1"AREA FOR DRIPLINE 6.45 46.0 1.06 in/h
<br />6 HUNTER PGV-100-MB W/ EZ-1 DECODER 1"1"TURF ROTARY 120.08 36.0 1.13 in/h
<br />VALVE SCHEDULE
<br />Generated:2025-04-03 14:39
<br />P.O.C. NUMBER: 01
<br />Water Source Information:
<br />FLOW AVAILABLE
<br />Point of Connection Size:2"
<br />Flow Available 58.88 GPM
<br />PRESSURE AVAILABLE
<br />Static Pressure at POC:62 PSI
<br />Pressure Available:62 PSI
<br />DESIGN ANALYSIS
<br />Maximum Station Flow:36.56 GPM
<br />Flow Available at POC:58.88 GPM
<br />Residual Flow Available:22.32 GPM
<br />Critical Station:1
<br /> Design Pressure:40 PSI
<br /> Friction Loss:7.11 PSI
<br /> Fittings Loss:0.71 PSI
<br /> Elevation Loss:0 PSI
<br /> Loss through Valve:3 PSI
<br />Pressure Req. at Critical Station:50.8 PSI
<br />Loss for Fittings:0.01 PSI
<br />Loss for Main Line:0.15 PSI
<br />Loss for POC to Valve Elevation:0 PSI
<br />Loss for Backflow:0 PSI
<br />Critical Station Pressure at POC:51.0 PSI
<br />Pressure Available:62 PSI
<br />Residual Pressure Available:11.0 PSI
<br />CRITICAL ANALYSIS
<br />I-801
<br />IRRIGATION DETAILS
<br />DWN BY:
<br />ISSUE DATE:
<br />PROJECT NO.:
<br />\\
<br />u
<br />s
<br />0
<br />2
<br />4
<br />2
<br />-
<br />p
<br />p
<br />f
<br />s
<br />s
<br />0
<br />1
<br />\
<br />s
<br />h
<br />a
<br />r
<br />e
<br />d
<br />_
<br />p
<br />r
<br />o
<br />j
<br />e
<br />c
<br />t
<br />s
<br />\
<br />1
<br />9
<br />0
<br />3
<br />0
<br />0
<br />2
<br />7
<br />9
<br />\
<br />5
<br />_
<br />D
<br />E
<br />S
<br />I
<br />G
<br />N
<br />\
<br />a
<br />_
<br />C
<br />A
<br />D
<br />\
<br />4
<br />_
<br />P
<br />L
<br />A
<br />N
<br />S
<br />H
<br />E
<br />E
<br />T
<br />S
<br />\
<br />I
<br />-
<br />1
<br />0
<br />1
<br />
<br />I
<br />R
<br />R
<br />I
<br />G
<br />A
<br />T
<br />I
<br />O
<br />N
<br />
<br />P
<br />L
<br />A
<br />N
<br />
<br />0
<br />2
<br />7
<br />9
<br />.
<br />d
<br />w
<br />g
<br /> 4/
<br />1
<br />0
<br />/
<br />2
<br />0
<br />2
<br />5
<br /> DA
<br />U
<br />G
<br />H
<br />E
<br />R
<br />T
<br />Y
<br />,
<br />
<br />A
<br />D
<br />A
<br />M
<br />DE
<br />S
<br />C
<br />R
<br />I
<br />P
<br />T
<br />I
<br />O
<br />N
<br />:
<br />DA
<br />T
<br />E
<br />:
<br />ISSUE NO.:
<br />IS
<br />S
<br />U
<br />E
<br />
<br />N
<br />O
<br />.
<br />:
<br />SHEET NO.:
<br />SHEET TITLE:
<br />4/
<br />1
<br />0
<br />/
<br />2
<br />0
<br />2
<br />5
<br />
<br />3
<br />:
<br />3
<br />1
<br />:
<br />2
<br />9
<br />
<br />P
<br />M
<br />CLIENT:
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />T
<br />I
<br />T
<br />L
<br />E
<br />:
<br />CHK'D BY:APP'D BY:
<br />1 CARLSON PKWY N
<br />PLYMOUTH, MN 55447
<br />PHONE: 763-479-4200
<br />WWW.STANTEC.COM
<br />PR
<br />I
<br />M
<br />R
<br />O
<br />S
<br />E
<br />
<br />S
<br />C
<br />H
<br />O
<br />O
<br />L
<br />
<br />-
<br />LA
<br />K
<br />E
<br />
<br />E
<br />L
<br />M
<br />O
<br />LA
<br />K
<br />E
<br />
<br />E
<br />L
<br />M
<br />O
<br />,
<br />
<br />W
<br />A
<br />S
<br />H
<br />I
<br />N
<br />G
<br />T
<br />O
<br />N
<br />
<br />C
<br />O
<br />U
<br />N
<br />T
<br />Y
<br />,
<br />MI
<br />N
<br />N
<br />E
<br />S
<br />O
<br />T
<br />A
<br />04/10/2025
<br />190300279
<br />KRM AWD JRA
<br />1
<br />SI
<br />T
<br />E
<br />
<br />P
<br />E
<br />R
<br />M
<br />I
<br />T
<br />
<br />P
<br />L
<br />A
<br />N
<br />S
<br />04
<br />/
<br />1
<br />0
<br />/
<br />2
<br />0
<br />2
<br />5
<br />1
<br />GENERAL NOTES:
<br />1.CONTRACTOR TO VERIFY ALL UNDERGROUND UTILITY LOCATIONS
<br />PRIOR TO COMMENCING WORK. CONTACT GOPHER STATE ONE AT
<br />(651)-454-0002.
<br />2.CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND SITE CONDITIONS
<br />SHOWN ON PLANS PRIOR TO CONSTRUCTION. NOTIFY LANDSCAPE
<br />ARCHITECT OR OWNERS REPRESENTATIVE OF MAJOR DISCREPANCIES
<br />THAT WILL AFFECT CONSTRUCTION OPERATIONS.
<br />3.CONTRACTOR IS RESPONSIBLE FOR COORDINATION OF THE
<br />INSTALLATION, AND OPERATION OF THE IRRIGATION SYSTEM WITHIN
<br />LIMITS OF WORK.
<br />4.DAMAGE TO PROPERTY FROM LANDSCAPE WORK MUST BE REPAIRED AT
<br />NO ADDITIONAL COST TO THE OWNER.
<br />5.IRRIGATION CONTRACTOR SHALL ARRANGE FOR ANY NECESSARY
<br />PERMITS AND/OR INSPECTIONS REQUIRED BY LOCAL AGENCIES OR
<br />ORDINANCES DURING THE COURSE OF CONSTRUCTION AS REQUIRED.
<br />6.WINTERIZATION OF THE IRRIGATION SYSTEM SHALL BE AS PER THE
<br />MANUFACTURER'S SPECIFICATIONS. CONTRACTOR IS RESPONSIBLE FOR
<br />THE FIRST WINTERIZATION AND SPRING STARTUP AFTER FINAL
<br />ACCEPTANCE. PROVIDE OWNER'S MANUAL AND OWNER'S
<br />REPRESENTATIVE TRAINING AT EACH SYSTEM EVENT.
<br />IRRIGATION CONTROLLER NOTES:
<br />1.IRRIGATION CONTROLLER LOCATION IS DIAGRAMMATIC, FIELD LOCATE WITHIN BUILDING. ELECTRICAL CONTRACTOR TO
<br />PROVIDE 120 V.A.C. TO DETERMINED LOCATION.
<br />2.IRRIGATION CONTROLLER AND EQUIPMENT TO BE INSTALLED PER MANUFACTURER'S RECOMMENDATIONS AND CITY
<br />STANDARD DETAILS.
<br />ELECTRICAL NOTES:
<br />1.ELECTRICAL POWER WILL BE PROVIDED WITHIN 10 FEET OF THE CONTROLLER LOCATION. COORDINATE WITH OWNER'S
<br />AUTHORIZED REPRESENTATIVE AS TO THE FINAL LOCATION OF CONTROLLER. COORDINATE HOOK-UP WITH ELECTRICAL
<br />CONTRACTOR AS REQUIRED.
<br />2.ALL POWER WIRE TAPS AND CONNECTIONS TO CONFORM TO LOCAL AND STATE CODES AND TO BE PERFORMED BY A
<br />LICENSED ELECTRICIAN.
<br />3.ALL 120 V.A.C. PRIMARY, AND 24 V.A.C. SECONDARY POWER TO BE INSTALLED AS PER STATE AND LOCAL CODES, WITH
<br />GROUND WIRE; MEETING N.E.C. AND M.A.C. REQUIREMENTS.
<br />4.CONTROL WIRE SHALL BE SOLID COPPER WIRE U.L. APPROVED FOR DIRECT BURIAL IN GROUND. MINIMUM GAGE: 12 AWG
<br />JACKETED DECODER CABLE FOR USE IN 2 WIRE SYSTEMS. PROVIDE ONE EXTRA RUN OF HUNTER CABLE FOR ENTIRE MAIN
<br />LINE PATH.
<br />5.INSTALL VALVE WIRES IN ONE CONTINUOUS PULL FROM VALVES TO CONTROLLER, WITHOUT SPLICES. IF NECESSARY, ALL 24
<br />V.A.C. FIELD SPLICES TO BE NOTED ON "AS-BUILT" DRAWINGS AND LOCATED IN ECONO VALVE BOXES AND MARKED.
<br />6.ALL 24 VAC WIRE SPLICING SHALL BE EXECUTED WITH DIRECT BURIAL SPLICE KITS AS MANUFACTURED BY 3M. ONLY SPLICE
<br />KIT MODEL DBR/Y-6 IS ALLOWED.
<br />SPRAY HEAD NOTES:
<br />1.FULL (HEAD-TO-HEAD) COVERAGE IS REQUIRED WITHIN THE AREAS DELINEATED TO RECEIVE IRRIGATION.
<br />2.LOCATE ALL HEADS 0'-6" FROM BACK OF WALK, CURB, ETC. AND ADJUST NOZZLES TO WATER ENTIRE PLANTING AREA,
<br />INCLUDING AREA FROM BACK OF WALK TO HEAD.
<br />3.ALL POP-UP STYLE IRRIGATION HEADS TO BE LOCATED IN TURF AREAS SHALL BE INSTALLED SO THE TOP OF THE IRRIGATION
<br />HEADS ARE 1/4" ABOVE FINISH GRADE.
<br />4.IRRIGATION CONTRACTOR SHALL REDUCE THE "THROW" OR RADIUS OF SPRAY NOZZLES WHEREVER SPRAY HEAD REQUIRED
<br />FOR PROPER COVERAGE HAS A RADIUS THAT EXCEEDS THE PLANTING AREA DIMENSIONS.
<br />5.WHEN INSTALLING SPRAY SERIES NOZZLES THAT REQUIRE ARC PATTERNS OTHER THAN THE STANDARD ARC PATTERNS (E.G.,
<br />360, 180, AND 90), THE CONTRACTOR SHALL USE THE APPROPRIATE FIXED ARC PATTERN (E.G. 120, 240, 270). THE
<br />CONTRACTOR SHALL USE VARIABLE ARC NOZZLES WHEN INSTALLING IRRIGATION HEADS ONLY WHEN REQUIRED PATTERN IS
<br />NOT ONE OF THE FIXED ARC PATTERNS. SELECT THE RADIUS OF VARIABLE ARC NOZZLES NOZZLES TO MATCH SITE
<br />CONDITIONS.
<br />6.THE IRRIGATION CONTRACTOR SHALL BE RESPONSIBLE FOR MAKING FIELD ADJUSTMENTS TO THE IRRIGATION SYSTEM BY
<br />INSTALLING A QUARTER CIRCLE OR HALF CIRCLE SPRINKLER HEAD ON EACH SIDE OF ANY VERTICAL ELEMENT (UTILITY
<br />BOXES, STREET LIGHTS, TREES, ETC.) WHICH PREVENTS PROPER COVERAGE BY INTERFERING WITH THE SPRAY PATTERN OF
<br />THE IRRIGATION HEAD. ALL ADJUSTMENTS SHALL BE MADE AT NO ADDITIONAL COSTS TO THE OWNER.
<br />7.LOCATE ROWS OF HEADS AND DRIP IRRIGATION LATERAL GROUPINGS AT TOP AND MID SLOPE TO MINIMIZE AND / OR
<br />ELIMINATE STANDING WATER AT BOTTOM OF SLOPE. TO THE EXTENT POSSIBLE, AVOID LOCATING HEADS AT BOTTOM OF
<br />SLOPE. CIRCUIT HEADS AT SAME ELEVATION TOGETHER.
<br />8.DRAINAGE OF IRRIGATION WATER THROUGH SPRAY HEAD WILL NOT BE ALLOWED. INSTALL CHECK VALVES OR EQUAL AS
<br />REQUIRED TO CONTROL LOW HEAD DRAINAGE. INSTALLATION OF CHECK VALVE FEATURES SHALL BE INCLUDED IN THE BID
<br />PRICE OF THE IRRIGATION SYSTEM.
<br />9.THE IRRIGATION CONTRACTOR SHALL BE RESPONSIBLE FOR SETTING ALL SPRAY HEADS TO BE PERPENDICULAR TO THE
<br />ADJACENT FINISH GRADE UNLESS INSTRUCTED OTHERWISE.
<br />IRRIGATION DESIGN NOTES:
<br />1.THE IRRIGATION CONTRACTOR SHALL BE RESPONSIBLE FOR FAMILIARIZING THEMSELVES WITH ALL DIFFERENCES IN GRADE, LOCATION
<br />OF OBSTRUCTIONS, LOCATION OF UTILITIES, ETC. MAKE IRRIGATION POINT OF CONNECTION AS INDICATED ON PLAN AND COORDINATE
<br />WITH OTHER WORK AS REQUIRED. EXACT LOCATION OF VACUUM BREAKER TO BE APPROVED BY LANDSCAPE ARCHITECT PRIOR TO
<br />INSTALLATION.
<br />2.THE IRRIGATION SYSTEM DESIGN IS BASED UPON THE MINIMUM OPERATING PRESSURE OF 70 PSI AND THE MAXIMUM FLOW DEMAND
<br />OF 40 GPM AT EACH POINT OF CONNECTION. THE IRRIGATION CONTRACTOR SHALL VERIFY WATER PRESSURE PRIOR TO
<br />CONSTRUCTION. ANY DIFFERENCE BETWEEN THE WATER PRESSURE INDICATED ON THE DRAWINGS AND THE ACTUAL PRESSURE
<br />READING AT THE IRRIGATION POINT OF CONNECTION SHALL BE IMMEDIATELY REPORTED IN WRITING TO THE OWNER'S AUTHORIZED
<br />REPRESENTATIVE. IF THE PRESSURE DIFFERENCES ARE NOT IMMEDIATELY REPORTED PRIOR TO BEGINNING CONSTRUCTION, THE
<br />IRRIGATION CONTRACTOR SHALL ASSUME FULL RESPONSIBILITY FOR ALL REVISIONS TO THE IRRIGATION SYSTEM DEEMED NECESSARY
<br />BY THE OWNER'S REPRESENTATIVE AND ALL COSTS ASSOCIATED WITH THOSE REVISIONS. IF STATIC PRESSURE EXCEEDS 80 PSI, A
<br />PRESSURE REDUCER IS REQUIRED.
<br />3.THE IRRIGATION DESIGN PRESENTED IN THESE DOCUMENTS IS INTENDED TO BE DIAGRAMMATIC AND INDICATIVE OF THE WORK TO BE
<br />COMPLETED. ALL IRRIGATION EQUIPMENT, PIPING AND VALVE LOCATIONS, ETC. SHOWN WITHIN PAVED AREAS ARE FOR DESIGN
<br />CLARIFICATION AND SHALL ONLY BE INSTALLED ON OWNER'S PROPERTY, WITHIN CONSTRUCTION LIMITS, AND WITHIN PLANTING
<br />AREAS UNLESS OTHERWISE NOTED ON PLANS. IRRIGATION CONTRACTOR SHALL INSTALL ALL REMOTE CONTROL VALVES, QUICK
<br />COUPLERS, AND ISOLATION VALVES, IN SHRUB PLANTING AREAS OR AS APPROVED BY OWNER'S REPRESENTATIVE & THE LANDSCAPE
<br />IRRIGATION DESIGNER. TO THE EXTENT POSSIBLE, LOCATE ELECTRIC REMOTE CONTROL VALVE BOXES OUT OF DIRECT VIEW, YET
<br />ACCESSIBLE. AVOID ANY CONFLICTS BETWEEN THE SPRINKLER SYSTEM, PLANTING, LIGHTING AND ARCHITECTURAL FEATURES.
<br />4.WHEN IT IS APPARENT TO THE LANDSCAPE CONTRACTOR IN THE FIELD THAT OBSTRUCTIONS, GRADE DIFFERENCES, OR DIFFERENCES
<br />IN THE CALCULATED AREA DIMENSIONS EXIST THAT MAY HAVE NOT BEEN CONSIDERED IN THE DESIGN OF THE SYSTEM, THE
<br />IRRIGATION CONTRACTOR SHALL NOT WILLFULLY INSTALL THE IRRIGATION SYSTEM AS INDICATED ON THE CONSTRUCTION DRAWINGS.
<br />THE OWNER'S AUTHORIZED REPRESENTATIVE SHALL BE NOTIFIED IN WRITING OF ANY SUCH OBSTRUCTIONS OR DIFFERENCES PRIOR
<br />TO BEGINNING ANY IRRIGATION INSTALLATION. IF NOTIFICATION IS NOT RECEIVED PRIOR TO BEGINNING INSTALLATION, THE
<br />IRRIGATION CONTRACTOR SHALL ASSUME FULL RESPONSIBILITY FOR ALL REVISIONS TO THE IRRIGATION SYSTEM AS DEEMED
<br />NECESSARY BY OWNER'S REPRESENTATIVE AND ALL COSTS ASSOCIATED WITH THOSE REVISIONS.
<br />5.IRRIGATION SYSTEM SUPPLY SHALL INCLUDE WATER METER, BACKFLOW PREVENTOR AND WINTERIZATION VALVES. COORDINATE WITH
<br />BUILDING MEP INSTALLATION.
<br />6.IRRIGATION SYSTEM TO INCLUDE RAIN SENSOR, CONTROLLER, ENCLOSURES, PIPING, VALVES, SUBSURFACE DRIPLINE, SPRAY HEADS,
<br />ROTORS, EMITTERS AND ALL OTHER COMPONENTS NECESSARY TO INSTALL A COMPLETE SYSTEM AS REQUIRED IN THE PLANS AND
<br />SPECIFICATIONS. IRRIGATION BID TO INCLUDE CONTRACTOR PROVIDED SUBMITTALS FOR REVIEW. SEE SPECIFICATIONS.
<br />7.THE CONTRACTOR IS RESPONSIBLE TO PROVIDE ALL IRRIGATION EQUIPMENT AND APPURTENANCES, INCLUDING ITEMS NOT SHOWN,
<br />BUT NECESSARY TO ACHIEVE A COMPLETE AND OPERABLE IRRIGATION SYSTEM.
<br />8.THE IRRIGATION CONTRACTOR SHALL BE RESPONSIBLE FOR INSTALLING ALL CONTROL WIRE AND MAINLINE SLEEVING OF SUFFICIENT
<br />SIZE, UNDER ALL PAVED AREAS IN ADDITION TO THE SLEEVING SHOWN ON THE DRAWINGS.
<br />9.SLEEVING LOCATIONS ARE APPROXIMATE AND INTENDED TO SHOW INTENT ONLY. FIELD ADJUST SLEEVE LOCATIONS AS NECESSARY.
<br />10.CAP THE ENDS OF ALL SLEEVES NOT CURRENTLY IN USE.
<br />11.ALL PRODUCT APPLICATIONS AND INSTALLATIONS MUST MEET MANUFACTURER'S REQUIREMENTS.
<br />12.FLOW RATES THROUGH PVC PIPING NOT TO EXCEED MANUFACTURER'S RECOMMENDATIONS.
<br />13.IRRIGATION PLANS TAKE PRECEDENCE OVER IRRIGATION SPECIFICATIONS. ANY DISCREPANCIES BETWEEN THESE TWO DOCUMENTS
<br />MUST BE BROUGHT TO THE ATTENTION OF THE LANDSCAPE ARCHITECT PRIOR TO BID OPENING.
<br />14.DESIGN INTENT IS TO PROVIDE AN IRRIGATION SYSTEM THAT PROVIDES SUFFICIENT WATER TO ALL PLANTING AREAS AND LIMITS
<br />WATER FROM NON-IRRIGATED AREAS. KEEP IRRIGATION WATER OFF OF ALL BUILDINGS, SIDEWALKS, ROADWAYS, AND OTHER PAVED
<br />SURFACES. IT IS THE RESPONSIBILITY OF THE IRRIGATION CONTRACTOR TO FIELD ADJUST AND / OR RECTIFY THESE CONDITIONS AS
<br />NECESSARY TO ENSURE THAT OVERSPRAY AND RUNOFF DO NOT OCCUR.
<br />15.THE IRRIGATION CONTRACTOR SHALL BE RESPONSIBLE FOR ADJUSTING THE PRESSURE REGULATOR ON EACH ELECTRIC CONTROL
<br />VALVE SO THE IRRIGATION HEAD FARTHEST AND HIGHEST IN ELEVATION FROM ITS ASSOCIATED CONTROL VALVE FUNCTIONS WITHIN
<br />THE OPERATING PRESSURE SHOWN ON THE IRRIGATION LEGEND (NOT TO EXCEED 5 PSI ABOVE THE INDICATED OPERATING PRESSURE).
<br />JDR MSFMSF
|