08-199 Wind Generator - Laserfiche WebLink

Home Browse Search

c) Clin7bing. To prevent unauthorized climbing, such apparatus shall not be located within 12 feet of the ground, and a locked anti -climb device shall be installed on the tower. d) Signage. Properties with wind generators shall have at least one (1) sign posted at the entrance of the property or structure on which the wind generator is mounted, containing the following infon-nation: voltage infonnation, manufacturer's name, emergency telephone number, and emergency shutdown procedures. There shall also be signs located on transformers and substations which are directly connected to the system. Systems shall not be used for displaying any advertising, nor for other uses including but not limited to cell phone antennas, flags, ham radio antennas, etc. e) Lightning, All wind generators shall be protected against lightning strikes. f) Aviation. No Wind Generator shall be located in a way that will create an obstruction to navigable airspace of public and private airports in Minnesota. Wind Generators are prohibited in the Lake Elmo Airport Safety Zone. g) Feeder lines. The electrical collection system (Wind Generator) shall be placed underground within the interior of each parcel. They may run through Public water ways subject to DNR, FWS, and or USACOE permits. h) For all guyed towers. Visible and reflective objects, such as plastic sleeves, reflectors or tape, shall be placed on the guy wire anchor points and along the outer and innermost guy wires up to a height of 8 feet above the ground. i) Screening. Wind Generator are exempt from the screening requirements. j) Aesthetics. The appearance of the Wind Generator, tower and ally other related components shall be maintained throughout the life of the wind generator per the manufactures/industry standards. Ground mounted wind generators shall be installed on tubular and monopole design towers. k) Color. Wind Generators shall be unifon-n in color, white or off white, grey, or another non -obtrusive color. Finishes shall be matt or non -reflective. 1) Vibration, No wind generator shall produce vibrations through the ground that are perceptible beyond the property on which it is located. m)Noise, Wind Generator shall comply with language outlined in Chapter 130: General Offences; Noise Control Section 130.45. n) Lighting, Systems shall not be illuminated unless required by the Federal Aviation Administration (FAA), state, or federal regulations. o) Electrical Certification. Batteries or other energy storage device shall be designed consistent with the Minnesota Electrical code and Minnesota Fire Code. Wind Generators must also meet the standards established by the International Electrotechnical Commission (IEC) I