FINAL ORDINANCE NO. 08-075 - Laserfiche WebLink

Home Browse Search

AN ORDINANCE AMENDING THE LAKE ELMO CITY CODE OF ORDINANCES ,,, PROPERTY CODE AS AMENDED. SECTION I . The City Council of the City of Lake Elmo hereby amends Chapter 150. General Provisions, r•y adding _ following language: 5150.900 The City of lake Elmo does hereby adopt, by reference, the year 2006 edition of the International Property Maintenance Code, as hereinafter amended pursuant to this ordinance, as the Property Maintenance Code of the City of Lake Elmo. 5150.901 That the year 2006 edition of the International Property Maintenance Code adopted by this ordinance is hereby modified by deleting the following sections: 103.2, 103.3, 302.4, and sections 111.1 through 111.8. 5150.902 That the year 2006 edition of the International Property Maintenance Code adopted by this ordinance is hereby amended by modifying the following denominated sections thereof to read as hereinafter set forth: Chapter 1 101.1 For the purpose of this article, these regulations shall be known as the Property Maintenance Code of the City of Lake Elmo, hereinafter referred to as this code. 102.3 Application of Other Codes. Repairs, additions or alterations to a structure, or changes of occupancy, shall be done in accordance with the procedures and provisions of the Minnesota State Building Code. Nothing in this code shall be construed to cancel, modify or set aside any of the provisions of the City of Lake Elmo Zoning Code. 103.1 Enforcement. Responsibility for enforcement of this code shall be vested in the City's Building Officials Office, The City's Building Official is hereby appointed as the code official for the purposes of this code and employees acting under his or her discretion and control shall be deemed to be deputy code officials. 103.5 Fees. The fees for activities and services performed by the department carrying out its responsibilities under this Code shall be determined by the City Council. Chapter 3 304.14 insect. Screens. During the period from May 15 to October 31 every door window and other outside opening required for ventilation of habitable rooms, food preparation areas, food service areas or any areas where products to be included or utilized in food for human consumption are processed, manufactured, packaged or stored shalt be supplied with approved tightly fitting screens of not less than 16 mesh per inch (16 mesh per 25 mm), and every screen door used for insect control shall have a self -closing device in good working condition.