Ordinance 769 - Laserfiche WebLink

Home Browse Search

Ordinance 769 Page 4 • a. Interim Use Permit: An interim use permit (IUP) must be obtained in accordance with procedures identical in form and substance to the conditional use permit procedures found in Section 1125.01, subdivision 3 of the Mounds View Municipal Code. Any IUP- ~^+nrim , E~° r,°rm~+ issued for an interim use billboard shall automatically expire no later than aes°~~~~'~ July 1, 2037 or earlier if so indicated in the resolution a~~rovinq the IUP ^r,.,h°r, +h° 1°^~° .~r,r°°.,-.°.,+fnr+ho . An IUP shall be null-and-void if the applicant fails to obtain any required permit from the State of Minnesota. (Ord. 644, 12-13-99; Ord. 656, 3-27-00; Ord. 679, 5-29-01; Ord. 708, 12-30-02) b. Location: The billboard must be located along US Highway 10 Feld-1-1~?. Interstate 35W. Old Hiahwav 8 or the south side of County Road 10, south of the intersection with Woodale Drive. The applicant must have an approved lease agreement with the property owner. The billboard shall be oriented towards the indicated rights of way. . Billboards must be located at least two hundred fifty feet (250') from residentially zoned property. Billboards may be located adjacent to the right-of-way of a street or highway, but no part thereof shall extend over such right-of--way. (Ord. 644, 12-13-99; Ord. 679, 5-29-01) c. Minimum Spacing: The minimum spacing between Billboards must be at least • o°„°n h~ ~r„-Ir°ra fiffi, f°°} /7.(1'1 ,,,,r+ five hundred feet (500'), except on County Road 10, which shall be at least fifteen hundred feet (1,500'). Spacing between signs shall be measured by projecting the nearest points of the signs to the property line of the right-of-way from which they are intended to be read and measuring the distance in a straight line between the projected points. Required spacing shall apply only to billboards on the same side of the same roadway. (Ord. 644, 12-13-99; Ord. 679, 5-29-01; Ord. 708, 12-30-02) d. Maximum Sign Area: The maximum gross surface display area of the sign cannot exceed seven hundred (700) square feet per side except that any rectangular billboard may contain temporary extensions, cutouts, or top lettering which occupy a total area not in excess of twenty five percent (25%) of the area of the basic billboard and form an .integral part of the design thereof. No such temporary extension, cut out, or top lettering may project more than six feet (6') from the top, eighteen inches (18") from either side or fifteen inches (15") from the bottom of the basic rectangular advertising message. The area of an extension, cutout, or top lettering shall be deemed to be the area of the smallest rectangle into which such extension, cutout, or top lettering will fit. (Ord. 644, 12-13-99; Ord. 679, 5-29-01) e. Orientation of Sign Faces: Billboards may have no more than two (2) sign faces. Sign faces must be back-to-back with sign faces parallel or angled. All billboards with their faces back-to-back and parallel shall have no greater distance than eight feet (8') . between the faces. All billboards with faces at an angle shall have no greater angle than thirty-five degrees (35°). (Ord. 644, 12-13-99; Ord. 679, 5-29-01)