Laserfiche WebLink
Ordinance 883 <br />Page 11 <br />i. Utility Company Interconnection. Prior to the installation or erection of a <br />WECS the operator must provide evidence showing their regular electrical <br />service provider has been informed of the customer's intent to install an <br />interconnected customer -owned generator. Off -grid systems shall be exempt <br />from this requirement. All connections shall be underground. <br />j. Compliance with State Building Code. A standard drawing of the structural <br />components of the wind energy conversion system and support structures, <br />including base and footings shall be provided along with engineering date and <br />calculations to demonstrate compliance with the structural design provisions <br />of the State Building Code. Drawings and engineering calculations shall be <br />certified by a registered engineer. <br />k. Compliance with National Electrical Code. WECS electrical equipment and <br />connection shall be designed and installed in adherence to the National <br />Electrical Code. <br />If a WECS is not maintained in operational conditions and poses a potential <br />safety hazard the owner shall take expeditious action to correct the situation. <br />Subd. 5. Submittal Requirements. <br />a. Site Plan Drawing. All applications for a WECS Conditional Use Permit shall <br />1. Lot lines and dimensions. <br />2. <br />and guy wire anchors. <br />3. Location and height of all adjacent buildings, structures and <br />aboveground utilities and trees located within three hundred fifty (350) <br />feet of the exterior boundaries of the property in question. <br />4. An elevation drawing of the premises accurately depicting the <br />proposed WECS and its relationship to structures on the subject site <br />and adjacent lots. <br />