My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
06-02-2014 WS
MoundsView
>
Commissions
>
City Council
>
Agenda Packets
>
2010-2019
>
2014
>
06-02-2014 WS
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
1/28/2025 4:48:16 PM
Creation date
7/10/2018 12:58:07 PM
Metadata
Fields
Template:
MV Commission Documents
Commission Name
City Council
Commission Doc Type
Agenda Packets
MEETINGDATE
6/2/2014
Supplemental fields
City Council Document Type
City Council Packets
Date
6/2/2014
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
17
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
<br />(b) The remaining fifty (50) percent of all exterior wall finishes <br />shall be comprised of any combination of decorative or rock face <br />concrete block, concrete panels, metal or wood. All building <br />materials subject to approval of the City. <br />(c) Buildings may be constructed of primarily one of the <br />materials listed in Subd. 4d (1)(a), if the design exceeds the intent <br />of the ordinance. <br />(d) Non-decorative exposed concrete block buildings are <br />prohibited, as are pre-engineered metal buildings, corrugated <br />metal-sided buildings, and wood sided buildings unless such <br />metal buildings and wood sided buildings are enhanced on all <br />elevations by the application of brick, decorative masonry, or <br />decorative stucco surfaces in combination with decorative fascia <br />overhangs and trim. <br /> <br />(2) Architectural Design: Each building will be reviewed for at least the <br />following considerations: <br /> <br />(a) Appropriate location of structures on the site with <br />relationship to other site amenities, restrictions, adjacent land <br />usage, etc. <br />(b) General layout, roof treatments, proportion and quality of <br />exterior. <br />(c) In the design of buildings or clusters of buildings, developers <br />should orient projects so that the side(s) facing County Road 10 <br />form the front of the project. Where front toward County Road 10 <br />is not feasible due to the location of access roads and other site <br />constraints, the project should be oriented and designed in such a <br />manner so as to convey a pleasing appearance from County <br />Road 10. <br />(d) Screening of mechanical equipment, tanks, loading docks, <br />refuse handling, ancillary equipment, etc., whether on the roof or <br />on the site. <br />(e) Drainage pipes on exterior building walls facing a street <br />and/or County Road 10 must be integral to the design and non- <br />apparent. <br />(f) Exceptions to the architectural design standards set forth in <br />this section may be granted by the City Administrator or designee, <br />for structures of comparable design and building materials. <br /> <br />(3) Building and Parking Setback Requirements: Buildings and parking <br />lots should have no more than a five (5) foot setback from County <br />Road 10. The required setbacks for the other sides of the property will <br />be determined by the City, based on the specific project and land <br />usage. <br /> <br />2 <br />
The URL can be used to link to this page
Your browser does not support the video tag.